Instructions

Function
The FlowCal™ Strainer version combines a Y-strainer with
an integral ball valve. Inspection, cleaning, and replacing
the strainer cartridge can be done easily without removing
the body from the pipeline. The ball valve control stem is
blow-out proof and has as standard a zinc-plated steel
handle with vinyl grip. PT test ports are available,
separately purchased or pre-assembled to check for the
degree of clogging in the strainer.
Drain valves are also available as an accessory for
installing in the blowdown port connection.
Product range
120 Series Y-strainer with ball valve, with and without Pressure and Temperature Test ports;
sizes 1/2" - 3/4" - 1" - 1 1/4"
Technical characteristics
Material: Body: brass
Strainer
cartridge: stainless steel
Seals: EPDM
Ball: brass, chrome-plated
Ball seat and stem seal: PTFE + EPDM
Lever: zinc coated steel with vinyl grip
Pressure and temperature test port plugs: brass
Pressure and temperature test ports: body and cap- brass; core- nordel
Drain port plug: brass
Performance: Medium: water, glycol solutions
Max. percentage of glycol: 50%
Max. working pressure: 400 psig (400 WOG)
Working temperature range: 14–212°F (-20–100°C)
Strainer mesh diameter: 0.87 mm(20 mesh)
Connections: 1/2", 3/4", 1", 1-1/4" FNPT or Sweat with union x FNPT or Sweat
Pressure and temperature test ports connections: 1/4" FNPT
Blowdown port connection: 1/2" - 3/4": 1/4" FNPT
1" - 1 1/4": 1/2" FNPT
Flow rate (Cv): 1/2": 8.0; 3/4": 8.4; 1": 19.3; 1-1/4": 20.0
Identification: metal plate with ball chain stating strainer mesh size
CALEFFI
FlowCal Y-Strainer
120 Series
NA38229
www.caleffi.com
© Copyright 2011 Caleffi

Summary of content (4 pages)