User Guide

Maintenance
To perform maintenance, simply use
a 26 mm hexagon wrench (1) to
unscrew the dirt collection chamber,
to which the inner mesh element is
connected for removal and for
cleaning.
1
1
Draining off dirt
The dirt separator collection
chamber has a ball drain
cock. Using the handle
provided it is possible to drain
off the accumulated dirt
particles even with the system
in operation.
5
WARNING: The symbol shown
on the removable ring indicates the
presence of magnets that generate a
strong magnetic field. This could cause
damages to electronic devices kept in
its proximity.
1. Remove the insulation by taking off
the bottom casing of the collection
chamber first, and if necessary, the
top insulation casing later.
2. Remove the magnetic ring
containing the two magnets, that
during operation attracted the
ferrous particles.
3. Flush out the ferrous and nonferrous
debris by turning the handle to open
the drain valve.
4. When finished, replace the insulation
shells.
Procedure for removing insulation and draining dirt
particles in the DIRTMAG series 5463