DirtMagPro Spec Sheet

Draining off dirt and ferrous impurities
The dirt separator collection chamber has a drain valve. Using the
handle provided it is possible to drain off the accumulated dirt particles.
Turn off the circulator before blowdown.
For the DIRTMAG PRO, captured impurities are easily flushed by unclamping
the magnetic collar, pulling out the magnetic pull rod from the top-mounted
brass dry-well and opening the drain valve. Allow for a minimum 4¾ inch
space above the separator to completely remove the magnetic pull rod.
Aided by the system pressure, the dirt and ferrous impurities, including
magnetite, flushes out quickly and effectively.
Maintenance
To perform annual inspection and maintenance, if needed, simply use a 26 mm
hexagon wrench (1) to unscrew the dirt collection chamber, of the DIRTMAG
PRO, to which the inner mesh element is connected for removal and cleaning.
1
Tmax 110°C
P
max
10 bar
Tmax 105°C
P
max
10 bar
BI-DIRECTIONAL
1
Bottom connection
The DIRTMAG PRO comes complete with a drain valve installed on the
bottom port, Caleffi code 538402 FD.
1
Tmax 110°C
P
max
10 bar
Tmax 105°C
P
max
10 bar
BI-DIRECTIONAL
1