Brochure

Heating & Cooling

Components for today’s modern hydronic systems

DIRTMAG

5463 SERIES

2-IN-1 DIRT AND

MAGNETIC SEPARATORS

PRODUCT FEATURES

Highly efcient 2-in-1 dirt and magnetic debris separation

DIRTMAG

removes non-ferrous debris from systems as small as 5 microns. Ferrous debris forms

in systems when iron or steel corrodes. This abrasive, extremely ﬁne sediment is difﬁcult to remove

by traditional methods and can cause damage to heat exchangers and circulators. DIRTMAG

accomplishes 2 ½ times the ferrous oxide removal performance of other dirt separators, delivering up

to 100% elimination efficiency.

 Low velocity zone and large dirt capture area:

Pipe velocity slows by a factor of 9 as ﬂuid enters

chamber. Unlike strainers which clog and cause

increased pressure drop, debris is removed from

the ﬂow path and captured in lower bowl area,

simplifying and reducing frequency of cleaning.

Robust mesh construction:

Unique dirt separation mesh uses deﬂection and

gravity to separate dirt particles as small as 5 microns

from ﬂow stream. Concentric pattern design has low

ﬂow resistance resulting in 85% less pressure drop

compared to same size y-strainer.

Powerful neodymium rare-earth magnets:

Magnetic ﬁeld attracts and captures microscopic

ferrous oxide impurities. Removes 2 ½ times the

ferrous oxide compared to other dirt separators.

Clip-on magnetic ring and convenient purge

valve: Opening purge valve and removing magnetic

ring releases captured magnetic impurities and

purges all dirt without shutting down the system.

Top access port:

½” npt top provides convenient chemical

additive dosing port.

Corrosion resistant:

All components highly resistant to hydronic

chemical additives or unstable pH ﬂuid.

PAGE 1
DIRTMAG® 5463 SERIES 2-IN-1 DIRT AND MAGNETIC SEPARATORS Heating & Cooling Components for today’s modern hydronic systems PRODUCT FEATURES  Low velocity zone and large dirt capture area:  Robust mesh construction: Pipe velocity slows by a factor of 9 as fluid enters Unique dirt separation mesh uses deflection and chamber. Unlike strainers which clog and cause gravity to separate dirt particles as small as 5 microns increased pressure drop, debris is removed from from flow stream.
PAGE 2
PRODUCT RANGE - DIRTMAG® CONSTRUCTION CODE SIZES MAX. FLOW RATE: (GPM) NPT SWEAT PRESS 1” 10 546306A 546328A 546366A 1¼” 15 546307A 546335A 546367A 1½” 22 546308A 546341A 546368A 2” 39 546309A 546354A 546369A ACCESS PORT & PLUG LARGE CHAMBER SERVICEABLE MESH MAGNET U.S Patent pending. DRAIN VALVE DIRTMAG separators can be purchased with Boiler Treatment Kits, code numbers not listed here. See Caleffi List Price Catalog. ® PERFORMANCE APPLICATION DIAGRAM MAX.