Product Overview

Insulation shells
The brass DIRTCAL
®
series 5462 and the brass DIRTMAG
®
series 5463
can be supplied with optional insulated covers, code CBN5462xx series
purchased separately, to minimize heatloss.
Code Size
CBN546205
For ¾" & 1"
DIRTCAL
®
, DIRTMAG
®
CBN546207
For 1" & 1½"
DIRTCAL
®
, DIRTMAG
®
CBN546209
For 2"
DIRTCAL
®
, DIRTMAG
®
Technical specications
Material: closed cell expanded PE-X
Thickness: 25/64" (10 mm)
Density - inner part: 1.9 lb/ft
3
(30 kg/m
3
)
- outer part: 3.1 lb/ft
3
(50 kg/m
3
)
Thermal conductivity (DIN 52612):
- at 32ºF (0ºC): 0.263 BTU·in/hr·ft
2
·ºF (0.038 W/(m·K)
- at 104ºF (40ºC): 0.312 BTU·in/hr·ft
2
·ºF (0.045 W/(m·K)
Coefficient of resistance to water vapor (DIN 52615): >1,300
Working temperature range: 32–212ºF (0–100ºC)
Reaction to fire (DIN 4102): class B2
Removing insulation and draining impurities (D)
1. Remove the insulation by taking off the bottom casing of the collection
chamber first, and if necessary, the top insulation casinglater.
2. Remove the magnetic ring containing the two magnets, that during
operation attracted the ferrous particles.
3. Flush out the ferrous and nonferrous debris by turning the handle to
open the drain valve.
4. When finished, replace the insulation shells.
D
CHILLER
Tmax 110°C
P
max 10 bar
Tmax 105°C
P
max 10 bar
BI-DIRECTIONAL
Tmax 110°C
P
max 10 bar
Tmax 105°C
P
max 10 bar
BI-DIRECTIONAL
Tmax 110°C
P
max 10 bar
Tmax 105°C
P
max 10 bar
BI-DIRECTIONAL
Tmax 110°C
P
max 10 bar
Tmax 105°C
P
max 10 bar
BI-DIRECTIONAL
Tmax 110°C
P
max 10 bar
Tmax 105°C
P
max 10 bar
BI-DIRECTIONAL
Tmax 110°C
P
max 10 bar
Tmax 105°C
P
max 10 bar
BI-DIRECTIONAL
Tmax 110°C
P
max 10 bar
Tmax 105°C
P
max 10 bar
BI-DIRECTIONAL
Tmax 110°C
P
max 10 bar
Tmax 105°C
P
max 10 bar
BI-DIRECTIONAL
T
max
110°C
P
max 10 bar
T
max
105°C
P
max 10 bar
BI-DIRECTIONAL
T
max
110°C
P
max 10 bar
T
max
105°C
P
max 10 bar
BI-DIRECTIONAL
Tmax 110°C
P
max 10 bar
Tmax 105°C
P
max 10 bar
BI-DIRECTIONAL
Tmax 110°C
P
max 10 bar
Tmax 105°C
P
max 10 bar
BI-DIRECTIONAL
Tmax 110°C
P
max 10 bar
Tmax 105°C
P
max 10 bar
BI-DIRECTIONAL
Tmax 110°C
P
max 10 bar
Tmax 105°C
P
max 10 bar
BI-DIRECTIONAL
Tmax 110°C
P
max 10 bar
Tmax 105°C
P
max 10 bar
BI-DIRECTIONAL
Tmax 110°C
P
max 10 bar
Tmax 105°C
P
max 10 bar
BI-DIRECTIONAL
CHILLER
Installation
The dirt separator must always be installed in a vertical position,
preferably on the return circuit upstream of the boiler (or chiller).
This enables it to intercept dirt particles already present in the circuit,
particularly when it is first started, before they reach the boiler (orchiller).
Flow direction for the DIRTCAL
®
and DIRTMAG
®
dirt separators is
bidirectional, flowing in either direction is permitted.