Product Overview

P
A
T
F
T
T
Tmax 110ϒC
P
max 10 bar
Tmax 105ϒC
P
max 10 bar
BI-DIRECTIONAL
T
P
F
A
T
Shut-off valve
Ball valve
BALLSTOP
Thermometer
Differential
by-pass valve
Flow switch
Zone valve
Pump
FlowCal
™
Stub pipe
Temperature
sensor
Safety
thermostat
Regulator
Expansion
tank
3-way cock
Pressure
switch
Control pocket
Gas filter
Gas regulator
Y- strainer
Fuel
shut-off valve
Air separator
Vibration
damping
coupler
Pocket
Pressure
relief valve
Backflow
preventer
We reserve the right to change our products and their relevant technical data, contained in this publication, at any time and without prior notice.
Caleffi North America, Inc.
3883 W. Milwaukee Road
Milwaukee, WI 53208
Tel: [phone] · Fax: [phone]
[e-mail] · www.caleffi.com
© Copyright 2016 Caleffi North America, Inc.
5462 Series DIRTCAL
®
— Brass with Sweat and NPT connections
Dirt separator in brass. NPT threaded connections from 3/4" to 2", integral sweat connections 1" to 2", and integral press connections 1" and 1-¼". Top
connection 1/2" FNPT (with plug). Drain valve with 3/4" garden hose connection. Internal mesh element of glass reinforced nylon PA66G30, removable for
cleaning. Brass body. EPDM hydraulic seals. Suitable fluids: water or 50% maximum glycol solution. Maximum working pressure 150 psi (10 bar), Temperature
range 32 to 250°F (0 to 120°C). Particle separation capacity: to 5μm(0.2mil). Pre-formed insulation shells available separately for field installation. Provide with
optional automatic air vent, Caleffi code 502243A.
5463 Series DIRTMAG
®
— Brass with Sweat and NPT connections
Dirt separator with magnet in brass. NPT threaded and integral sweat connections 1" to 2", and integral press connections 1" and 1-¼". Top connection 1/2" FNPT
(with plug). Drain valve with 3/4" garden hose connection. Internal mesh element of glass reinforced nylon PA66G30, removable for cleaning. Brass body with an
external removable magnet ring, neodymium rare-earth. EPDM hydraulic seals. Suitable fluids: water or 50% maximum glycol solution. Maximum working pressure
150 psi (10 bar), Temperature range 32 to 250°F (0to 120°C). Particle separation capacity: to 5 μm (0.2 mil). Ferrous impurities separation efficiency: up to 100%
removal. Pre-formed insulation shells available separately for field installation. Provide with optional automatic air vent, Caleffi code 502243A.
5465 Series DIRTCAL
®
— Flanged Steel
Dirt separator in steel. ANSI B16.5 CLASS 150 RF flanged connections from 2" to 4". Top connection 3/4" NPT male (with cap). Supplied with drain ball valve brass
body with 1" NPT for drain. Internal mesh element of stainless steel. Non-asbestos fiber hydraulic seals. Suitable fluids: water or 50% maximum glycol solution.
Maximum working pressure 150 psi (10 bar). Temperature range 32 to 270°F (0 to 132°C). Particle separation capacity: to 5 μm (0.2 mil). Provide with optional
automatic air vent, Caleffi code 501502A.
5465M Series DIRTMAG
®
— Flanged Steel
Dirt separator with magnet in steel. ANSI B16.5 CLASS 150 RF flanged connections from 2" to 4". Top connection 3/4" NPT male (with cap). Supplied with drain
ball valve brass body with 1" NPT for drain. Internal mesh element of stainless steel and HDPE. Steel body with a stack of neodymium rare-earth magnets inside
a brass dry-well, removable for purging. Non-asbestos fiber hydraulic seals. Suitable fluids: water or 50% maximum glycol solution. Maximum working pressure
150 psi (10 bar). Temperature range 32 to 270°F (0 to 132°C). Particle separation capacity: to 5 μm (0.2 mil). Ferrous impurities separation efficiency: up to 100%
removal. Provide with optional automatic air vent, Caleffi code 501502A.
NA5465 Series DIRTCAL
®
— Flanged Steel ASME, CRN
Dirt separator in steel. ANSI B16.5 CLASS 150 RF flanged connections from 2" to 6". Top connection 3/4" NPT male (with cap). Supplied with drain ball valve brass
body with 1" NPT for drain. Internal mesh element of stainless steel. Non-asbestos fiber hydraulic seals. Suitable fluids: water or 50% maximum glycol solution.
Maximum working pressure 150 psi (10 bar). Temperature range 32 to 270°F (0 to 132°C). Particle separation capacity: to 5 μm (0.2 mil). The separator is designed
and built in accordance with Section VIII, Division 1 of the ASME Boiler and Pressure Vessel Code and tagged and registered with the National Board of Boiler and
Pressure Vessel Inspectors, CRN Registered, and stamped for 150 psi (10 bar) working pressure, with ASME U stamp. Provide with optional automatic air vent,
Caleffi code 501502A.
SPECIFICATION SUMMARIES
Application diagram
5465M Series DIRTMAG
®
— Flanged Steel ASME
Dirt Separator with magnet in steel. ANSI B16.5 CLASS 150 RF flanged connections from 2" to 8". Top connection ¾" NPT male (with cap). Supplied with
drain ball valve brass body with 1" NPT female (code NA39753, separator size 2" to 6") or 2" NPT female (code NA59600, separator size 8") for drain. For
separator size 8” only thermometer pocket well on inlet/outlet flanges ½” NPT female. Internal mesh element of stainless steel and HDPE. Steel body with
a stack of neodymium rare-earth magnets inside a brass dry-well, removable for purging. Non-asbestos fiber hydraulic seals. Suitable fluids: water or 50%
maximum glycol solution. Maximum working pressure 150 psi (10 bar). Temperature range 32°F to 270°F (0°C to 132°C). Particle separation capacity: to 5
μm (0.2 mil). Ferrous impurities separation efficiency: up to 100% removal. The separator is designed and built in accordance with Section VIII, Division 1 of the
ASME Boiler and Pressure Vessel Code and tagged and registered with the National Board of Boiler and Pressure Vessel Inspectors and stamped for 150 psi
(10 bar) working pressure, with ASME U-stamp. CRN pending, contact Caleffi. Provide with automatic air vent, Caleffi code 501502A.