User Guide

4
Installation
The SEP4™ should be installed only by qualified personnel in accordance with current local codes
and legislation. The SEP4™ is installed between the primary and secondary circuits, always in a
vertical position.
CAUTION: Corrosion or leakage can cause damage or injury. Periodically
inspect for signs of corrosion or leakage. If corrosion or leakage is noted,
the vent must be replaced. Failure to follow these instructions could result in
property damage and/or personal injury.
Service instructions
There is no service required for the SEP4™ combination air, hydraulic, dirt and magnetic separator.
Leave this manual at the service of users for their use
7-19-18
·
Installation Tip
Scan to view
548, 549 & 5495
Caleffi North America, Inc.
3883 W. Milwaukee Road
Milwaukee, WI 53208
T: 414.238.2360 F: 414.238.2366