Submittal Form

Submittal Data 02910 NA - Issue Date 04/2010
NA548 ASME Series With Flanged Connections
Hydro Separator
Application
The hydronic separator creates a zone with a low pressure loss, which enables
the primary and secondary circuits connected to it to be hydraulically independent
of each other; the flow in one circuit does not create a flow in the other.
Hydraulic characteristics
The hydronic separator should be sized according to the maximum
flow rate at the inlet. The selected design value must be the
greatest between the primary circuit and the secondary circuit.
Typical Specification
Furnish and install on the plans and described herein, a Caleffi Hydro
Separator as manufactured by Caleffi. Each separator must be designed with an
epoxy resin painted steel body, a brass blowdown drain valve and automatic
brass air vent with brass shutoff valve. The separator design must include ANSI
B16.5 Class 150 RF flanges. The separator must be constructed in accordance
with the latest revision of the ASME Boiler and Pressure Vessel Code and
stamped for 150 psi (10 bar) working pressure. Each separator shall be Caleffi
model NA548 or approved equal. (See product instructions for specific installa-
tion information.)
F
B
C D E
A
HYDRO SEPARATOR
A
F
D C E
A A
HYDRO-SEPARATOR
B
Dimensions
CALEFFI
2 1/2” - 6”
8“ - 12”
Technical Data
Flanged connections
Materials:
- Body: epoxy resin painted steel
- Drain and shut-off valve: brass
- Air vent body: brass
Suitable fluids: water, or 50% max. glycol solution
Max working pressure: 150 psi (10 bar)
Temperature range:
- with insulation: 32-220°F (0-105°C)
- without insulation: 32-250°F (0-120°C)
Connections:
- Flanged: 2 1/2” - 12” ANSI B 16.5 Class 150 RF
- Drain: 1 1/4” & 2” FNPT
Insulation for versions up to 4“
Internal Part:
Material: rigid closed cell expanded polyurethane foam
Thickness: 2 3/8” (60 mm)
Density: 3 lb/ft (45 kg/m3)
Thermal conductivity: 6 BTU/in (0.023 W/m·K)
Temperature range: 32-220° F (0 – 105°C)
External cover:
Material: embossed aluminium
Thickness: 7.0-mil (0.7 mm)
Reaction to fire: class 1
Head covers: Heat moulded material: PS
Size 2" 2 1/2" 3" 4" 5" 6" 8" 10" 12"
gpm 40.0 80.0 124.0 247.0 330.0 485.0 792 1320 1850
l/sec. 2.5 5.0 7.8 15.6 20.8 30.6 50.0 83.3 116.7
Flow Capacity
Code A B C D E F
NA548052A 2" 1 1/4" 13" 13" 15" 14"
NA548062A 2 1/2" 1 1/4" 13" 13" 15" 14"
NA548082A 3" 1 1/4" 15" 17 3/4" 17" 18"
NA548102A 4" 1 1/4" 15" 17 3/4" 17" 18"
NA548120A 5" 1 1/4" 15" 22" 19" 25"
NA548150A 6" 1 1/4" 15" 22" 19" 25"
NA548200A 8" 2" 39 3/8" 33 7/8" 27 1/2" 35 1/2"
NA548250A 10" 2" 43 5/16" 35 7/8" 30" 41 3/4"
NA548300A 12" 2" 47 1/4" 37 7/8" 31 1/2" 47 3/4"
Code Weight (lb) (kg) Flow (gpm) (l/sec) Volume (gal) (l)
NA548052A 73.0 33.1 40.0 2.5 4.0 15.1
NA548062A 79.0 35.8 80.0 5.0 4.0 15.1
NA548082A 108.0 49.0 124.0 7.8 8.0 30.3
NA548102A 117.0 53.1 247.0 15.6 8.0 30.3
NA548120A 220.0 99.8 300.0 18.9 22.5 85.2
NA548150A 231.0 104.8 484.0 30.5 23.2 87.8
NA548200A 550.0 249.5 792.0 50.0 95.0 359.6
NA548250A 725.0 328.9 1330.0 83.9 175.0 662.4
NA548300A 1100.0 499.0 1850.0 116.7 255.0 965.3
Cale North America, Inc. 3883 West Milwaukee Road / Milwaukee, WI 53208
Tel: [phone] / Fax: [phone] / www.cale.us © Copyright 2010 Cale
We reserve the right to change our products and their relevant technical data, contained in this publication, at any time and without prior notice. Contractors should request production drawings if prefabricating the system.
Size ...................................................................................................
Quantity ............................................................................................
Approval ............................................................................................
Service ...............................................................................................
Tag No. ..............................................................................................
Notes .................................................................................................
Job name ..........................................................................................
Job location .......................................................................................
Engineer ............................................................................................
Mechanical contractor ........................................................................
Contractorʼs P.O. No. ..........................................................................
Representative ...................................................................................