Brochure

ManualsBrandsCaleffi ManualsHeating SuppliesInverted Flare 2-Way Straight Zone Valve Body 50 psi (2.5 Cv)

Removal of the actuator

1. Move the manual open lever to the lock open position.

2. Press the push button in and pull the actuator up.

Z-one Normally Closed Valve Actuators Z-one Normally Open Valve Actuators

Code Description Code Description

Z111000 24V with auxiliary switch 18" wire Z131000 24V with auxiliary switch 18" wire

Z111000

HCS 24V with high current aux. switch 18" wire Z136000 120V with auxiliary switch 6" wire

Z116000 120V with auxiliary switch 6" wire Z133000 208V with auxiliary switch 6" wire

Z113000 208V with auxiliary switch 6" wire Z134000 230V with auxiliary switch 6" wire

Z114000 230V with auxiliary switch 6" wire Z135000 277V with auxiliary switch 6" wire

Z115000 277V with auxiliary switch 6" wire Z141000 24V without auxiliary switch 18" wire

Z151000 24V w/auxiliary switch terminal block Z146000 120V without auxiliary switch 6" wire

Z121000 24V without auxiliary switch 18" wire Z143000 208V without auxiliary switch 6" wire

Z126000 120V without auxiliary switch 6" wire Z144000 230V without auxiliary switch 6" wire

Z123000 208V without auxiliary switch 6" wire Z145000 277V without auxiliary switch 6" wire

Z124000 230V without auxiliary switch 6" wire

Z125000 277V without auxiliary switch 6" wire

Z-one 2-way Straight Through Valve Bodies Z-one 3-way Diverting Valve Bodies

Code Description Cv ∆P Code Description Cv ∆P

Z200041 Inverted Flare 1.0 75 psi Z300041 Inverted Flare 1.0 75 psi

Z200042 Inverted Flare 2.5 50 psi Z300042 Inverted Flare 2.5 50 psi

Z200043 Inverted Flare 3.5 30 psi Z300043 Inverted Flare 3.5 30 psi

Z200053 1/2" SAE Flare 3.5 30 psi Z300053 1/2" SAE Flare 3.5 30 psi

Z200411 1/2" NPT 1.0 75 psi Z300411 1/2" NPT 1.0 75 psi

Z200412 1/2" NPT 2.5 50 psi Z300412 1/2" NPT 2.5 50 psi

Z200413 1/2" NPT 3.5 30 psi Z300413 1/2" NPT 3.5 30 psi

Z200431 1/2" Sweat 1.0 75 psi Z300431 1/2" Sweat 1.0 75 psi

Z200432 1/2" Sweat 2.5 50 psi Z300432 1/2" Sweat 2.5 50 psi

Z207433 1/2" Sweat

lead-free brass 3.5 30 psi Z307433 1/2" Sweat lead-free brass 3.5 30 psi

Z200512 3/4" NPT 2.5 50 psi Z300512 3/4" NPT 2.5 50 psi

Z200513 3/4" NPT 3.5 30 psi Z300513 3/4" NPT 3.5 30 psi

Z200515 3/4" NPT 5.0 25 psi Z300515 3/4" NPT 5.0 25 psi

Z200517 3/4" NPT 7.5 20 psi Z300517 3/4" NPT 7.5 20 psi

Z200532 3/4" Sweat 2.5 50 psi Z300532 3/4" Sweat 2.5 50 psi

Z200533 3/4" Sweat 3.5 30 psi Z300533 3/4" Sweat 3.5 30 psi

Z200535 3/4" Sweat 5.0 25 psi Z300535 3/4" Sweat 5.0 25 psi

Z200537 3/4" Sweat 7.5 20 psi Z300537 3/4" Sweat 7.5 20 psi

Z207537 3/4" Sweat

lead-free brass 7.5 20 psi Z307537 3/4" Sweat lead-free brass 7.5 20 psi

Z200617 1" NPT 7.5 20 psi Z300617 1" NPT 7.5 20 psi

Z200635 1" Sweat 5.0 25 psi Z300635 1" Sweat 5.0 25 psi

Z200637 1" Sweat 7.5 20 psi Z300637 1" Sweat 7.5 20 psi

Z200737 1-1/4" Sweat 7.5 20 psi Z300737 1-1/4" Sweat 7.5 20 psi

Fitting of the actuator

1. Move the manual open lever to the lock open position.

3. Verify the correct position of the valve stem into the

mating actuator hole. Move stem if required to allign.

4. Press the push button in and slide the actuator onto the

valve body, release the push button.