Use and Care Manual

VinylFix Use and Care Manual
1. Choose a color from the formula chart
found inside front label that most closely
matches the tile.
• For a more realistic repair, match
the background color (usually much
lighter) rst, then add foreground
graining or marbling
2. Measure the required amount of putty
onto the mixing board.
3. Follow directions for the Mixing Method (A
or B) which applies to your formula.
All surfaces should be clean and dry.
Shake pigment bottles thoroughly before and during use.
Mix Formula Application
1. Apply mixture to tile with the plastic
spatula, slightly overlling the area of
repair. Scrape o any surrounding excess
with spatula. Allow to dry 2-3 hours.
2. When the mixture is freshly dry, gently rub
away the excess of the surrounding area
with a damp cloth until the surface is
smooth.
3. If shrinkage occurs, re-apply the above
mixture.
4. Once the repair is completely dry (8-12hrs)
and graining or marbling is nished,
apply clear lacquer over the area using
the brush.
5. Allow to fully cure before heavy use (2-3
days).
HEALTH AND SAFETY
KEEP OUT OF REACH OF
CHILDREN
• Irritating to eye and skin.
In case of contact with skin,
wash with soap and water.
In case of contact with eyes,
rinse immediately with
plenty of clean, fresh
water. • If swallowed, rinse mouth
and throat with cold water.
Immediately seek professional
medical advice. Take this label
with you. Do not induce
vomiting.
For LVT, VCT, Vinyl, Linoleum & WPC
Mix2Match™
VinylFix