Installation Guide
For additional assistance or service call: 1-888-277-FLOR or visit our website www.cal-or.com
SOLUTIONS FOR YOUR FLOORS VaporBlock
6 mil Polyethylene Film
Installation
1) Always follow the flooring manufacturer’s
installation instructions with respect to preparing and
leveling the subfloor.
2) Unroll VaporBlock PE film. Cut film about 2 inches
longer than wall to ensure full moisture protection of
the flooring.
3) Overlap adjoining seams by 3”. Use attached
positioning tape to help align.
4) Tape tears, cuts and end seams with packaging tape
to ensure full moisture protection.
Cal-Flor VaporBlock helps protect
oor from harmful vapor emissions.
Using lm over rough suboors
when installing pad-attached
ooring allows the ooring to
smoothly expand and contract,
reducing lateral friction.
Rolls out to 150 Sq Ft
6 mil x 6’ (72”) x 25’
20170307
Installation Guide