PRECAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Contents 7. Specification General Specification Power Supply Requirement..................................................DC 12V Maximum Power Output............4 x 25W(measured at DC 14.4 V) Dimensions(w x h x d)....................................178 x 50 x 160mm 1. Before Operation...........................................................................................3 1.1 Glossary................................................................................................ 3 1.2 Precautions......
6. The Trouble Shooting 1. Before Operation 1.1 Glossary PBC (playback control) It is a kind of signal(menu) recorded in the disc with SVCD or VCD2.0 format used for the playback control. For the discs containing PBC, it can playback interactive software with the menu displayed on TV. And if the disc contain still images, it can playback high definition of still image. Please read the user ’s manual carefully before using the DVD player.
1.3 Maintenance and Cleaning of Discs 4. In the connection status: the audio of mobile phone transfers to the car audio system whenever a dialling takes place or receiving a call. 5. Dialling when in connection status 5.1 Dial with the mobile phone directly. 5.2 Dial with remote control with the following procedures: (1) Input telephone number with number buttons 0-9 * Press CLEAR button briefly to cancel the wrongly input number if necessary (2) Press TEL briefly to execute the dialling.
1.5 The Remote Control Description 3 27 35 5. BLUE TOOTH HANDFREE SYSTEM 1 1. ANG BUTTON PWR 14 2. MENU BUTTON OPEN EQ 4 BAND 2 29 MU MODE MENU 33 32 6 0K SEL 9 34 8 + CL EAR 5 7 31 40 10 1 2 3 4 -1 0 +1 0 5 6 7 8 CLK 9/AF 0/10 TA 10+ /P TY S LOW_ FWD ST 11 28 25 SEARCH # ZOO M 26 INT AUDIO RPT APS RDM TITLE/PBC S UBTITLE PAIR REDIAL A- B 23 36 6. > BUTTON 7. |<< BUTTON 8. v BUTTON 9. SEL BUTTON 16 10. PLAY/PAUSE BUTTON 15 LOC 21 22 5.
* The Region Code 1.6 The Locations and Names of Controls on or in the unit 1 5 3 22 18 19 BAND APS 20 8 Q: REGION ERROR displayed after inserting disc into disc compartment. Why ? A: Because the DVD player and disc has respective region codes. If the region codes do not match , the DVD player can not play the disc. MODE OPEN AV IN USB Appendix: The region code of DVD: The Motion Picture Association of America (MPAA) divided the world into 6 regions, and named every region a code .
1.7 Wires Connection Description * The Parental Control The Description of the Wires Connection Fixing Screw Bolt Q:After inserting DVD disc into disc compartment, it will appear a dialogue window that asks me to input a password of 4 digit. Why ? A:This is because the disc movie you are playing was rated with the Parental Control, and the current rating level of DVD player is lower than one of the current discs. You must input the password and enter it to access the Parental Control setup menu.
4.23.5 SPEAKER SETUP DOWNMIX It is for selecting your desired sound effect when there is not central speaker and subwoofer. There are 3 mode: LT/RT, STEREO, VSS. LT/RT: When playing a disc with PRO LOGIC Dolby stereo effect, choose the item, so it will output audio signal with vivid theatre effect. STEREO: If you choose the item, when outputting audio signal with 5.
2. Common Operation 1. To turn on/off the unit In power off mode, short press the POWER button to turn on the unit. In power on mode, long press the POWER button on the front panel or short press the POWER button on the remote control to turn off the unit. 2. To slide the monitor of the Car Audio System out of/into the chassis Pressing the OPEN button can slide the monitor of the Car Audio System out of the chassis or slide it into the chassis. 3.
2. There are 6 setup pages in all for the System Menu. Press the > or < button to select an desired setup page. 3. Press the ^ or v button to select an setup item in the selected setup page. 4. Press the > button to enter the setup item. Then press the v or ^ button to select a desired mode of the setup item, finally press the OK button to confirm it. Press the < button to return to the upper level.
5. PRESET STATION [ 1-6 ] BUTTONS In RADIO mode: 1) To memorize the current frequency on the current band, press and hold any one of the six preset buttons (1-6) on remote control or rotate number knob and long press it . 2) To recall the preset memory on the current band, press one of the preset buttons [1-6] on remote control or rotate number knob and press it . 6. STEREO/MONO BUTTON Press the ST button on the remote control to select the STEREO or MONO sound mode for FM band. 7.
4 .19 Program Playback It allows you to enter the order in which you want some chapters/tracks in DVD/VCD/MP3/WMA/CD to play. 1 During playback, press the PROG button to enter a program interface as follows: 2 Use the direction buttons to move cursor onto the desired place for inputting the sequence number. 3 Use the number button to input desired sequence number of title/chapter/ track with desired sequence.
: Tap it can pause playback ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF. Press one of the ^/v/>/< buttons to select the area you want to enlarge. : Tap it can stop playback . :Tapping one of them can switch on between the speed levels of fast backward or forward. (Except image mode.) 4.16 Change the Caption Language In the state of DVD playing, press the SUBTITLE button repeatedly to select the language of the caption or turn off the caption.(depend on the media used.
4.11 Playback in Scan Mode 4.2 Pause Playback 1. In the state of VCD(PBC OFF)/CD playing, press the INT button to play the previous 15 seconds part of each track on the disc. Press the INT button again to resume normal playback. In DVD/VCD/CD/MP3/WMA playing, press the PAUSE button on IR remote control to pause the playback, press the PLAY button to resume normal playback. 2. In the state of DVD/MP3/WMA playing, the INT button is not available. 4.3 Stop Playback 4.
2. Press the direction buttons to select your desired title, and then press the OK or PLAY button to open the root menu of the selected title. 3. Press the direction buttons to select your desired chapter, finally press the OK or PLAY button to play the selected chapter. During slow forward, press the PLAY button to resume normal playback. The function is only for video. 4.
2. Press the direction buttons to select your desired title, and then press the OK or PLAY button to open the root menu of the selected title. 3. Press the direction buttons to select your desired chapter, finally press the OK or PLAY button to play the selected chapter. During slow forward, press the PLAY button to resume normal playback. The function is only for video. 4.
4.11 Playback in Scan Mode 4.2 Pause Playback 1. In the state of VCD(PBC OFF)/CD playing, press the INT button to play the previous 15 seconds part of each track on the disc. Press the INT button again to resume normal playback. In DVD/VCD/CD/MP3/WMA playing, press the PAUSE button on IR remote control to pause the playback, press the PLAY button to resume normal playback. 2. In the state of DVD/MP3/WMA playing, the INT button is not available. 4.3 Stop Playback 4.
: Tap it can pause playback ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF. Press one of the ^/v/>/< buttons to select the area you want to enlarge. : Tap it can stop playback . :Tapping one of them can switch on between the speed levels of fast backward or forward. (Except image mode.) 4.16 Change the Caption Language In the state of DVD playing, press the SUBTITLE button repeatedly to select the language of the caption or turn off the caption.(depend on the media used.
4 .19 Program Playback It allows you to enter the order in which you want some chapters/tracks in DVD/VCD/MP3/WMA/CD to play. 1 During playback, press the PROG button to enter a program interface as follows: 2 Use the direction buttons to move cursor onto the desired place for inputting the sequence number. 3 Use the number button to input desired sequence number of title/chapter/ track with desired sequence.
5. PRESET STATION [ 1-6 ] BUTTONS In RADIO mode: 1) To memorize the current frequency on the current band, press and hold any one of the six preset buttons (1-6) on remote control or rotate number knob and long press it . 2) To recall the preset memory on the current band, press one of the preset buttons [1-6] on remote control or rotate number knob and press it . 6. STEREO/MONO BUTTON Press the ST button on the remote control to select the STEREO or MONO sound mode for FM band. 7.
2. There are 6 setup pages in all for the System Menu. Press the > or < button to select an desired setup page. 3. Press the ^ or v button to select an setup item in the selected setup page. 4. Press the > button to enter the setup item. Then press the v or ^ button to select a desired mode of the setup item, finally press the OK button to confirm it. Press the < button to return to the upper level.
2. Common Operation 1. To turn on/off the unit In power off mode, short press the POWER button to turn on the unit. In power on mode, long press the POWER button on the front panel or short press the POWER button on the remote control to turn off the unit. 2. To slide the monitor of the Car Audio System out of/into the chassis Pressing the OPEN button can slide the monitor of the Car Audio System out of the chassis or slide it into the chassis. 3.
4.23.5 SPEAKER SETUP DOWNMIX It is for selecting your desired sound effect when there is not central speaker and subwoofer. There are 3 mode: LT/RT, STEREO, VSS. LT/RT: When playing a disc with PRO LOGIC Dolby stereo effect, choose the item, so it will output audio signal with vivid theatre effect. STEREO: If you choose the item, when outputting audio signal with 5.
1.7 Wires Connection Description * The Parental Control The Description of the Wires Connection Fixing Screw Bolt Q:After inserting DVD disc into disc compartment, it will appear a dialogue window that asks me to input a password of 4 digit. Why ? A:This is because the disc movie you are playing was rated with the Parental Control, and the current rating level of DVD player is lower than one of the current discs. You must input the password and enter it to access the Parental Control setup menu.
* The Region Code 1.6 The Locations and Names of Controls on or in the unit 1 5 3 22 18 19 BAND APS 20 8 Q: REGION ERROR displayed after inserting disc into disc compartment. Why ? A: Because the DVD player and disc has respective region codes. If the region codes do not match , the DVD player can not play the disc. MODE OPEN AV IN USB Appendix: The region code of DVD: The Motion Picture Association of America (MPAA) divided the world into 6 regions, and named every region a code .
1.5 The Remote Control Description 3 27 35 5. BLUE TOOTH HANDFREE SYSTEM 1 1. ANG BUTTON PWR 14 2. MENU BUTTON OPEN EQ 4 BAND 2 29 MU MODE MENU 33 32 6 0K SEL 9 34 8 + CL EAR 5 7 31 40 10 1 2 3 4 -1 0 +1 0 5 6 7 8 CLK 9/AF 0/10 TA 10+ /P TY S LOW_ FWD ST 11 28 25 SEARCH # ZOO M 26 INT AUDIO RPT APS RDM TITLE/PBC S UBTITLE PAIR REDIAL A- B 23 36 6. > BUTTON 7. |<< BUTTON 8. v BUTTON 9. SEL BUTTON 16 10. PLAY/PAUSE BUTTON 15 LOC 21 22 5.
1.3 Maintenance and Cleaning of Discs 4. In the connection status: the audio of mobile phone transfers to the car audio system whenever a dialling takes place or receiving a call. 5. Dialling when in connection status 5.1 Dial with the mobile phone directly. 5.2 Dial with remote control with the following procedures: (1) Input telephone number with number buttons 0-9 * Press CLEAR button briefly to cancel the wrongly input number if necessary (2) Press TEL briefly to execute the dialling.
6. The Trouble Shooting 1. Before Operation 1.1 Glossary PBC (playback control) It is a kind of signal(menu) recorded in the disc with SVCD or VCD2.0 format used for the playback control. For the discs containing PBC, it can playback interactive software with the menu displayed on TV. And if the disc contain still images, it can playback high definition of still image. Please read the user ’s manual carefully before using the DVD player.
Contents 7. Specification General Specification Power Supply Requirement..................................................DC 12V Maximum Power Output............4 x 25W(measured at DC 14.4 V) Dimensions(w x h x d)....................................178 x 50 x 160mm 1. Before Operation...........................................................................................3 1.1 Glossary................................................................................................ 3 1.2 Precautions......