User Manual

ENGLISH
MANUAL
Connection and clock set
• Plug the adapter into a 100~240V AC outlet and the other end in the DC in
(10).
• Press the “
button (2)” to change the time shown on the clock
• The minutes will start blinking. Use the - / = Button (3 / 4) to set the minutes.
• Press the “ button (2)” again to set the hour
• The hour(s) will start blinking. Use the - / = Button (3 / 4) to set the hour.
• Press the “ button(2)”againtoconrmorwaitfor5sec.
Setting the alarm time
• Long press the “ button (2)” to change the alarm time
• The minutes will start blinking and the alarm indicator will show on the display.
Use the - / = Button (3 / 4) to set the minutes.
• Press the “ button (2)” again to set the hour
• The hour(s) will start blinking. Use the - / = Buttons(3 / 4) to set the hour.
• Press the “ button (2)” again to set alarm 2, repeat the steps above
• Press the “ button(2)”againtoconrmorwaitfor5sec.
General settings
• Double press the “ button (2)” to change to 12-hour / or 24-hour display.
• Press and hold the “= Button” for 2 sec to activate / de-activate alarm 1.
• Press and hold the “- Button” for 2 sec to activate / de-activate alarm 2.
• Short press - / = Button (3 / 4) to dimm / brighten the clock display, The clock
display is dimmed to minimal brightness automatically from 0:00 - 6:00
When the Alarm sounds...
• The alarm will sound for 3 minutes until it automatically shuts OFF with no
action.
• Tap any button on the device to SNOOZE. The alarm will sound again 5
Precautions
Points to observe for safe usage
Read this manual carefully before using this item and its components.
They contain instructions on how to use this product in a safe and
effective manner. Caliber Europe BV cannot be responsible for problems
resulting from failure to observe the instructions in this manual.
Turn off the device immediately in case of a problem.
Failure to do so may cause personal injury or damage to the product.
Return it to your authorized Caliber Europe BV dealer for repairing.
Product cleaning.
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything else
has the chance of dissolving the paint or damaging the plastic.
Temperature.
Ensure that the ambient temperature is between 0°C and +45°C
before turning on the device.
Maintenance.
If you have problems, do not attempt to repair the unit yourself.
Return it to your Caliber Europe BV dealer for servicing.
Placement.
Placetheproductonaatsurface.Provideenoughspace
aroundtheproductforsufcientventilation.
Heat.
Do not locate the appliance in the vicinity of a heat surface or
in direct sunlight.
Below the descriptions of the features/options of the HCG 019Qi. The number between the “(...)” refers to the
key or connections on the unit. The illustrations can be found in the front of this manual.