Instructions

Getting started
The radio is powered by the built-in lithium battery. A USB cable is
supplied in the product package.
Press and hold the [POWER] button to power on.
To power off the radio, press and hold the same button.
Charging battery
You can see the battery indicator showing on the top row of the display, in
alternate with the state of menu.
When battery power is low, the battery indicator will keep blinking as a
reminder for battery charging.
To charge the battery, connect the micro USB plug to the port at the right side
of the radio, connect the other end to a power source supplied in 5V OUT.
The flash aside battery indicator blinking the radio is being charged.
Note: The charging might take much longer to complete if the radio is
playing while charging.
Connecting to your Wireless network
Press and hold the [POWER] button to turn on the
radio. It will display as follow:
•
If this is first time use, Boot up and connect to www.skytune.com to try to
check updated software. “Configure Network?” wizard will be displayed.
Tune [NAV] button to choose Yes to start configuring network. Press the
[NAV] button to highlight Yes and press to confirm.
•
Select Add/Remove AP from list (AP is the access point), tune the [NAV]
button to scroll and press OK to confirm, then choose Add/Remove AP :