Operation Manual

6
Setting up your Dock
1 Plug one end of the included AC/DC
cable into the DC POWER input
on the back of your Curve iPad Dock.
Plug the other end into a standard
power socket.
2 Switch the power to ON on the
rear of the unit.
3 Extend the FM aerial cable
on the back of the unit.
Note:
If not using the unit for a long time,
disconnect the AC/DC adaptor from
the wall outlet.
1
Note:
Aerial positioning
You may need to reposition the aerial for
optimal reception. The best position is
dependent on the station and the strength
of the signal.
2
3
Setup
02