Operation Manual

8
Everyday use
Using the FM radio
Turn on your Curve iPad Dock by pressing
the STANDBY button. An FM frequency
will be displayed on the LED display.
1 You can select the desired frequency
manually by pressing and holding the
or button or by pressing the
SCAN button.
2 Fine tuning can be performed by
pressing the
or button once,
and repeating until the desired
frequency is found.
03
Tip:
Where a button that appears on both the
unit and the remote control is referenced in
this guide you can use either button to
perform that function.
Setting the time
After plugging your Curve iPad Dock into a
mains power socket, your Curve iPad Dock
will be in STANDBY mode.
1 Press and hold the TIME SET button
on the remote control to set the time
2 Press the
and buttons to set the
hour. Confirm by pressing the TIME
SET button.
3 The minute will flash,
use the
and
buttons to set the minute
and confirm by pressing the TIME
SET button.