22-10-2007 08:53 Pagina 1 E N G L I S H MCD 773 manual-EN-werkdoc.qxd 1. MUTE / POWER 2. EJECT 3. PANEL RELEASE 4. AUDIO MENU BUTTON / CD, DVD OK. BUTTON 5. MODE 6. ENCODER VOLUME 7. 3,5MM A/V IN JACK 8. SUBWOOFER / TUNER AF 9. 2 ZONE / TUNER TA 10. 1X-BASS / TUNER PTY 11.TUNER PS AS / CD SET-UP / DVD OSD SET-UP 12.TUNER M1 MEMORY 1 / CD PAUSE PLAY / DVD PAUSE PLAY 13.TUNER M2 MEMORY 2 / CD STOP / DVD STOP 14.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 2 E N G L I S H D I S C P L AY 2 PRECAUTIONS • Use only in a 12-volt DC negative-ground electrical system. • Disconnect the vehicle's negative battery terminal while mounting and connecting the unit. • When replacing the fuse, be sure to use one with an identical amperage rating. • Using a fuse with a higher amperage rating may cause serious damage to the unit. • DO NOT attempt to disassemble the unit.
MCD 773 manual-EN-werkdoc.
E N G L I S H MCD 773 manual-EN-werkdoc.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 5 PA N E L O P E N / C L O S E O P E R AT I O N This unit is equipped with the most advanced full logic motorized slide down system.You can enjoy this advance technology with just a single press of the “OPEN” button Please read carefully the following operation instruction before operating the unit. OPEN / CLOSE THE PANEL Press the Open button to slide down (open) a closed panel or to slide up (close) an opened panel.
MCD 773 manual-EN-werkdoc.
MCD 773 manual-EN-werkdoc.
E N G L I S H MCD 773 manual-EN-werkdoc.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 9 B A S I C O P E R AT I O N S 3) PANEL RELEASE BUTTON (REL) Press this button to remove the control panel. 1) POWER ON/OFF BUTTON Long press the POWER button or Short Press any other button on the front of the unit (except the Open/Eject) to turn On the unit. Long press the POWER button to turn Off the unit. 1) MUTE BUTTON Short Press the MUTE button to mute the audio output, and “Mute” will appear on the display.
E N G L I S H MCD 773 manual-EN-werkdoc.qxd 10 22-10-2007 08:53 Pagina 10 DISPLAY / MENU BUTTON This DISPLAY inter-change button can be used to interchange between the 2 types of DISPLAY INTERFACE, the 'Image Display Interface” & 'Big Font Display interface'.This is useful when playing a CD or MP3 or WMA or other music disc and if user prefers to see the CD Track no / MP3 File number and elapse time with bigger numerical fonts, the Big Font Display offers a better read out for the numerical display.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 11 DATE SET Once in Date Set mode, User can use the Encoder Vol Knob to adjust the Date / Month / Year. Short press the AUDIO button to confirm the entry and move to the next entry. CLOCK The time of the clock is set to 12:00 by default. User can adjust the time by rotate the Encoder Vol knob clockwise to adjust the minute and rotate the Encoder Vol knob anticlockwise to adjust the hour.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 12 E N G L I S H D UA L Z O N E O P E R AT I O N 12 “2-ZONE” DUAL A/V ZONE MULTI ENTERTAINMENT OPERATION: This unit is equipped with the most advanced “Dual A/V Zone” feature.This function is useful if the user would like to select different modes of the Audio and Video (AV) output source for Front and Rear Speakers and TFT Screens. For example, user can select to listen to Tuner music for front speakers and rear speaker for DVD movie.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 13 Sub-woofer Low Pass Filter (LPF) User has 5 seconds to use the encoder volume knob to select the 4 different Low Pass filter Flat, 80Hz, 120Hz or 160Hz. The Sub-woofer LPF control is only applicable if the unit is equipped with the optional subwoofer line out, and only if the unit is connected to an optional sub-woofer speaker.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 14 E N G L I S H TREBLE TREBLE (LEVEL) User has 5 seconds to use the encoder volume knob to adjust the desired Treble level range from -6 to +6. TREBLE CFQ (FREQ) User has 5 seconds to use the encoder volume knob to adjust the desired Treble center frequency to 10KHz, 12.5KHz, 15KHz, or 17.5KHz.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 15 2.TA FUNCTION By pressing TA button < 3 seconds, to switch on TA standby mode.The TA icon will light up on the LCD. In the stand by mode, when a traffic announcement broadcast starts, the traffic announcement broadcast will be received as top priority regardless of the function mode.
E N G L I S H MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 16 AUDIO CD OPERATION - REMOTE CONTROL To operates CD function through the following keys on the remote control. 17. 18. 14. 15. 8~9 19~29 32. 10~13 16. 7. PAUSE / PLAY BUTTON STOP NEXT BACK FAST FORWARD & FAST BACKWARD NUMERIC BUTTONS REPEAT UP/DOWN/LEFT/RIGHT BUTTON OK BUTTON RANDOM BUTTON 16 17) PAUSE/ PLAY BUTTON ( / M1) 1. Press PAUSE to pause playback (still mode).The sound from the disc is muted during still mode. 2.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 17 16)OK BUTTON Use this button to confirm the selection. 7) RANDOM BUTTON RANDOM button less than 3 seconds is “random play” all songs on the disc.To disable all file “ random play”, press RANDOM button less than 3 seconds. AU D I O C D O P E R AT I O N - C O N T RO L PA N E L The following functions are available operated through the control panel.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 18 E N G L I S H M P 3 / W M A O P E R AT I O N 18 MP3/WMA Operation-TFT Monitor When a MP3/WMA disc is inserted into the player and the following picture will appear on the TFT monitor. The player automatically plays the first track.The elapsed time within the track is displayed on the right side of the top line.When the track is finished, the second track will begin playing, and the track number on the top line will be updated.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 19 14) NEXT( ) Press NEXT to skip forward to the beginning of the next chapter. 15) BACK( ) Press BACK to skip backward to the beginning of the previous chapter. 8~9) FAST FORWARD& FAST BACKWARD( / ) 1. Press FAST FORWARD to fast forward through the disc. Each time the button is pressed, a new speed (2X, 4X, 8X or 20X) is selected. 2. Press PLAY to resume normal playback. 3. Press FAST BACKWARD to fast reverse through the disc.
E N G L I S H MCD 773 manual-EN-werkdoc.qxd 20 22-10-2007 08:53 Pagina 20 FILE SELECT Press the TRACK UP (20) or TRACK DOWN (21) button for less than one second to advance to the next file on the CD, The selected track number will appear on the display. Press and Hold TRACK UP (20) or TRACK DOWN (21) button for more than one second to fast forward or fast reverse through the disc. CD play starts when the button is released.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 21 DV D O P E R AT I O N DVD OPERATION - REMOTE CONTROL 21 2) EJECT BUTTON ( ) Press the EJECT button to eject the disc or loading the disc. 17)PLAY/PAUSE ( ) 1. Press PAUSE to pause playback. 2. Press PAUSE to single step forward to the next picture in the video (DVD and VCD only). 3. Press PLAY to resume normal playback. 18) STOP( ) 1. Press STOP to stop playback and show the logo screen.The player memorizes the location where playback is stopped.
E N G L I S H MCD 773 manual-EN-werkdoc.qxd 22 22-10-2007 08:53 Pagina 22 19 ~29) NUMERIC BUTTONS 1.When playback CD/MP3/WMA use for track number or File number direct access and use when function need numeric Selection or Input, like in the Goto function,etc. 2.When playback DVD use when function need numeric Selection or Input, like in the Goto function,etc 30A) DVD MENU 1. Press DVD MENU to invoke the menu screen included on the DVD disc (DVD only). 2.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 23 - Select "Title/Chapter" to jump to the beginning of a specific chapter within a specified title (DVD only) and enter the title and chapter numbers with the number pad and LEFT/RIGHT direction buttons, as follows: - Select "Track" to jump to the beginning of a specific track within a non-DVD disc and enter the track number with the number pad, as follows: 33) ZOOM BUTTON 1. Press ZOOM during normal, slow, or still playback. 2.
E N G L I S H MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 24 38)DVD AUDIO Press DVD AUDIO during playback to change the audio language when playback a DVD disc.The OSD indicates the current setting by giving the audio track number, language, audio type, and number of channels. For example: 1) The first press shows the current language selected; subsequent presses toggle The next audio language 2) Some DVDs allow audio selection change only via the disc menu.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 25 13.STOP (2 STOP) 1. Press STOP to stop playback and show the logo screen.The player memorizes the location where playback is stopped. 2. Press PLAY to resume playback from the location where playback is stopped (DVD,VCD 1.1,VCD 2.0 and audio CD). 3. Pressing STOP twice is resume playback from the beginning of the disc. 20. NEXT( ) Press NEXT to skip forward to the beginning of the next chapter. 21.
E N G L I S H MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 26 11.SET UP (AS/PS) While the DVD disc is being played or under stop mode, the “SET UP” (AS/PS) button on the control panel serve the following function: Long Press “SET UP” (AS/PS) button to bring up the System Setup Menu Please refer to the related description in “system Set Up” for details operation of “Set Up” ! After pressing the “Set Up” button, the LCD will display “Set Up” and keep on blinking.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 27 D I V X O P E R AT I O N The unit is support playback Divx files , the details operation as same as CD/MP3/WMA operation.The following are special functions for playback Divx File: EXTERNAL SUBTITLE External Subtitle setting is used for choosing the language domain, (only for Divx).After selecting one language domain (alphabet), when playback a divx with external subtitle, the subtitle display will use this language alphabet.
E N G L I S H MCD 773 manual-EN-werkdoc.qxd 28 22-10-2007 08:53 Pagina 28 - When trying to play a movie that was not purchased for this player (with the registration code above), the following screen will be displayed: - When trying to play a limited views movie (rental), the following screen will be displayed: A limited views management limits the number of times a user can view the rented movie. An expired error is displayed when this limit is reached, and the movie will not play again.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 29 The LEFT/RIGHT direction buttons are used to select the category of settings to be changed.To change a category, press OK and the page of settings for that category will be displayed.When the category changes are set, press UP repeatedly to return to the text buttons. Selecting the appropriate button and pressing OK can change settings in a different category. 1. Use the UP/DOWN direction buttons to select the setting to be changed. 2.
E N G L I S H MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 30 6.DIVX SUBTITLE Divx Subtitle setting is used for choosing the language domain, (only for Divx). After select one language domain (alphabet), when playback a divx with Divx subtitle, the subtitle display will use this language alphabet. if you find the displaying subtitle “words” aren't correctly, please ensure the external subtitle language and select the correct language.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 31 PRIORITY CONTENT While with DVD Audio disk, the user may define if the priority is to play the Audio content or the Video.The following options are available: PICTURE CD VIEW There are two options are available in Picture CD View. Original = Used to switch the picture size to the current display resolution directly. Fit to screen = Like letter box.Take the minimum value of horizontally fit scale ratio and vertically fit scale ratio.
E N G L I S H MCD 773 manual-EN-werkdoc.qxd 32 22-10-2007 08:53 Pagina 32 2. Use the UP/DOWN direction buttons to select the setting to be changed.The following subsections explain how to change each of the player's Rating settings. PASSWORD SELECTION TO LOCK AND UNLOCK THE PARENTAL CONTROL RATING Selecting the Password Setting:Allows the user to enter a password, to lock and unlock the parental control rating setting into the player.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 33 S P E C I F I C AT I O N TFT SCREEN SECTION Screen Size: 3.5"(Measured Diagonally) Screen Type:TFT Liquid Crystal Display active matrix Resolution: 960 (W) x 324 (H) DVD / CD SECTION Compatible Disc/Format Signal to Noise Ratio Dynamic Range Frequency Response See “ Disc Note” for more details description > 90 dB > 90 dB 20Hz to 20Khz +/-3dB VIDEO SECTION Color System Video Output Video Input NTSC / PAL Composite 1.0 Vp-p (+/- 0.
MCD 773 manual-EN-werkdoc.qxd 22-10-2007 08:53 Pagina 34 E N G L I S H T RO U B L E S H O OT I N G 34 Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer.