Operation Manual

ManualsBrandsCaliber ManualsMultimediaMCD 770

4IN1CARAUDIOSYSTEM

WITHDVD.JPEG.MP4.MP3.WMA.CD

USBANDMMC/SDPLAYER

AM/FM-RDSDIGITALPLLTUNINGRADIO

InstructionManual

FullyCompatibletoThese

FormatsofFiles:DVD,

JPEG,MP4,MP3,WMA,CD.

Remark:Anyinformationsubjecttochangewithoutfurthernotice

SLOW_FWD

A-B

ZOOM

AUDIO

INT

LOC

CLK

9/AF

-10

+10

SETUP

SEL

MU MODE

PWR

SUBTITLETITLE/PBC

RPT RDM

APS

0/10

10+

/PTY

BAND P/N

PROG

OSD LOUD

STEP

U.S.PatentNos.6,836,549;6,381,747;7,050,698;6,516,132;and5,583,936.

THISPRODUCTINCORPORATESCOPYRIGHTPROTECTION

TECHNOLOGYTHATISPROTECTEDBYU.S.PATENTSAND

OTHERINTELLECTUALPROPERTYRIGHTS.USEOFTHIS

COPYRIGHTPROTECTIONTECHNOLOGYMUSTBE

AUTHORIZEDBYMACROVISION,ANDISINTENDEDFOR

HOMEANDOTHERLIMITEDVIEWINGUSESONLYUNLESS

OTHERWISEAUTHORIZEDBYMACROVISION.REVERSE

ENGINEERINGORDISASSEMBLYISPROHIBITED.

ManufacturedunderlicensefromDolbyLaboratories.

Dolbyandthedouble-DsymbolaretrademarksofDolbyLaboratories.

7.Specification

GeneralSpecification

PowerSupplyRequirement..................................................DC12V

MaximumPowerOutput...................4x75W(measuredatDC14.4V)

Dimensions(wxhxd)...........................................178x50x165mm

DVDDeckSpecification

Format.....................................DVD/VCD/JPEG/MP4/MP3/WMA/CD

VideoSystem....................NTSC/PAL/PAL-M/PAL-N/AUTO(optional)

AudioSystem..............................................................24bit/96KHz

LoadingSystem..........................................................AutoLoading

MountingAngle.................................................................0to+/-30

Video

VideoType...................................................................16:9and4:3

VideoOutputlevel......................................Composite:1.00.2Vp-p

Loadimpedance:75ohms

HorizontalResolution................................................................600

Audio

AudioOutput(Analogaudio)..........................................2.0Vrms

FrequencyResponse.............................20Hz~20KHz(at1KHz0dB)

S/NRatio(Audio).............................................90dB

Separation..............................................................................50dB

Radio

FMSection

Frequencyrange..............................................87.5MHz-108.0MHz

Usablesensitivity......................................................................3uV

I.FFrequency....................................................................10.7MHz

AMSection

Frequency..........................................................522KHz-1620KHz

Specification

(at1KHz0dB)

Specification

≥

-1.0

3"TFT

/MU

USB

AUX

RDM

INT

RPT

+10

-10

MODE

REL

PUSHSEL

VOL

VIDEO

MCD770

PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com

Summary of content (14 pages)

PAGE 1
7. Specification MCD770 General Specification Power Supply Requirement..................................................DC 12V Maximum Power Output...................4 x 75W(measured at DC 14.4 V) Dimensions(w x h x d)...........................................178 x 50 x 165mm DVD Deck Specification Format.....................................DVD/VCD/JPEG/MP4/MP3/WMA/CD Video System....................NTSC/PAL/PAL-M/PAL-N/AUTO(optional) Audio System..........................................................
PAGE 2
6. The Trouble Shooting Please read the user s manual carefully before using the DVD player. If you have any troubles in using this player, try to solve the problems by the suggestions mentioned below. If you can not remove the trouble after using all the suggestions, please contact the company or the technical service center aut horized by us. For the sake of your safety, please do not open t he cover and repair the player by yourself, if that, it may cause electric shock.
PAGE 3
Contents 5 .21 The Region Code Q: No DVD playback. Screen displays REGION ERROR after inserting disc into disc compartment. Why ? A: B ecause the DVD player and disc have different region codes. If they do not m atch, the DVD player cannot play the disc. Appendix: The region code of DVD: 1. Before Operation...........................................................................................3 1.1 Glossary................................................................................................
PAGE 4
1. Before Operation 1.1 Glossary PBC (playback control) This is a signal(menu) recorded in the disc with SVCD or VCD2.0 format used for the playback control. For the discs containing PBC, It can playback interactive software with the menu displayed on monitor screen. If the disc contains still images, it can playback high definition still images. Title Generally, the title is the important part of DVD disc.
PAGE 5
HUE It is for adjusting the hue of the video output. SATURATION It is for adjusting the saturation of the video output. SHARPNESS It is for adjusting the sharpness of the video output. 5.19.5 SPEAKER SETUP SPEAKER SETUP DOWNMIX EXIT SETUP DOWNMIX It is for selecting your desired sound effect when there is no center speaker and subwoofer. There are 3 modes: LT/RT, STEREO, VSS.
PAGE 6
1.5 The Remote Control Description 5.19.2 LANGUAGE SETUP 3 27 35 1 PWR 14 BAND EQ P/N MU 33 6 0K SEL 9 8 + 5 7 31 40 10 3 4 6 7 8 CLK 9/AF 0/10 TA 10+ /PTY SLOW_FWD ST 1 2 -10 +10 5 11 28 26 25 SEARCH APS INT RPT RDM AUDIO TITLE/PBC SUBTITLE 16 17 19 A-B 23 36 10. PLAY/PAUSE BUTTON OSD LANGUAGE This item is for selecting the language of the SYSTEM MENU and all operating prompt interface displayed during playback.
PAGE 7
1.6 Locations and Names of the Controls For the DVD System Menu, there are 6 setup pages in all. They display as follows: 14 6 1 11 17 UP 4 8 9 3 5 .19.1 SYSTEM SETUP SYSTEM SETUP REL /MU 1 TV SYSTEM TV TYPE PASSWORD RATING DEFAULT PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com PUSH SEL _ 6 RPT DN TM +10 VIDEO 12 VOL -10 3" TFT + 3 15 5 B N D A P S 2 INT TA TV SYSTEM This product supports output of various TV system.
PAGE 8
20 7 1.7 Description of the Rear Cabinet GREY GREEN SUBWOOFER BLACK RED R RCA LINE OUT BLACK Fixing Screw Bolt WHITE L 3. During JPEG playback, press one of the >/: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN; v: LEFT<-->RIGHT During JPEG playback, press the PROG button to change the mode of refresh picture. During JPEG playback, press the STOP button to stop playing and return to the root menu.
PAGE 9
5 .14 Program Playback 1.8 UNIT INSTALLATION It allows you to enter the order in which you want some chapters/tracks in DVD/VCD/MP3/WMA/CD disc to play.
PAGE 10
2. Common Operation 1. To turn on/off the unit Under power off mode, press the POWER button to turn on the unit. Under power on mode, press and hold the POWER button on the front panel or briefly press the POWER button on the remote controller to turn off the unit. ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF. Press one of the ^/v/>/< buttons to select the area you want to enlarge. 5.
PAGE 11
5.5 Playback in Scan Mode 7. To demount the front panel 1. When playing VCD(PBC OFF)/CD discs, press the INT button to play the previous 10 seconds part of each track on the disc. Press the INT button again to resume normal playback. 2. When playing DVD/MP3/WMA discs, the INT button is not available. 5.6 Playback from a specified chapter/track or a specified time 1.
PAGE 12
3. Radio Operation During slow forward, press the PLAY button to resume normal playback. 1. BAND BUTTON In RADIO mode, press the BAND button on the remote control or on the front panel to select your desired radio band of FM1, FM2, FM3, AM1 and AM2, and the selected band will be displayed on the small monitor of the front panel. 2.
PAGE 13
In VCD mode 1. When starting to turn on the PBC function, it will play from the beginning of the disc till it display the PBC menu on TV screen if the disc include the PBC menu. 2. Press the number buttons to select your desired track to play. In MP3/WMA mode 1. The root menu is displayed on the monitor screen all the time(and the TITLE or MENU button is not available). 2.
PAGE 14
4. Basic Disc, USB or MMC/SD Operation 4.2 Pause Playback When playing DVD/VCD/CD/MP3/WMA discs, press the PAUSE button on IR remote control to pause the playback, press the PLAY button to resume normal playback. 4.1 Begin playback 1. Press the POWER button briefly to turn on the DVD player. After turning on the DVD player, please turn on the monitor, and ensure that the video output of the monitor is the video input from the DVD player connected with the monitor.