Operation Manual

16
Specifications
General
Power supply 12V DC (11V-16V)
Test voltage 14.4V,
negative ground
Maximum power output 45Wx4 channels
Continuous power output 25Wx4 channels
(4 10% T.H.D.)
Suitable speaker impedance 4-8 ohm
Pre-Amp output voltage 2 . 0 V ( C D p l a y
mode: 1KHz, 0dB,
10K load)
Fuse 15A
Dimensions (WxHxD)
- Chassis 178x100x164mm
- Nose 170x105x21
Weight 3.0kg
Aux-in level 300mV
Subwoofer out(optional) 2.0V
FM Stereo Radio
Frequency range 8 7 . 5 - 1 0 8 . 0 M H z
(Europe)
87.5-107.9MHz (USA)
Usable sensitivity 8dBμ
Frequency response 30Hz-15KHz
Stereo separation 30dB (1KHz)
Image response ratio 50dB
IF response ratio 70dB
Signal/noise ratio >55dB
Note: Specifications and the design are
subject to change without notice due to
improvements in technology.
AM(MW) Radio
Frequency range 5 2 2 - 1 6 2 0 K H z
(Europe)
530-1710KHz (USA)
Usable sensitivity 30dBμ
7 INCH TFT LCD
Display resolution (dot) 1440(W) x 234(H)
Active area (mm) 154.08 x 86.58
Screen size (inch) 7.0 (Diagonal)
Dot pitch (mm) 0.107×0.370
Contrast ratio 300
Disc Player
System Disc digital audio
system
Frequency response 20Hz - 20KHz
Signal/noise ratio >80 dB
Total harmonic distortion Less than 0.20%
(1KHz)
Channel separation >60dB
Video signal output NTSC
Video output level 1±0.2V
Video signal input PAL/NTSC/SECAM
TV Video signal input PAL/SECAM
TV Video signal output PAL/SECAM
Brightness 350 nits
Components
Machine screws M5x6 mm 4
M2.6x5 mm 4
Mounting bolt (50 mm) 1
Wire connector 2
Trim plate 1
Operating Instructions 1
Rubber cushion 1
Remote control 1