Troubleshooting guide

RCD 212BTi • MANUAL

Owner’ Manual

Installation

WARNING!

Disconnect negative battery terminal from battery

before starting installation. Consult the vehicle’s

owner’s manual for proper instructions.

NOTE:

Mark the polarity of the existing speaker wires before

disconnecting battery.

NOTE: Remove the two transport screws from the top of the

unit before installing.

1. After removing the old

radio and mounting sleeve,

insert supplied mount-

ing sleeve into opening.

2. Bend the tabs on the mount-

ing sleeve to keep the mount-

ing sleeve firmly in place.

3. Attach wires from the unit to

existing wires. See wiring con-

nections diagram. Insert radio

into dashboard. Then apply the

trim frame to outside of radio.

4. Support radio using sup-

plied rear mounting bolt

and steel bar. See parts list.

DIN Front Mount