Installation guide

EN - 13
Menu Function
TA VOL
RotatetheknobtoadjustTAvolume.
RETUNE mode
RETUNE mode:Rotatethe knobto choose
RETUNE-SorRETUNE-L.
RETUNE-S or RETUNE-L is time length
selectionofTASEEKretuneinterval.
RETUNE-S:short,TASEEKretuneintervalis
45 seconds.
RETUNE-L:long,TASEEKretuneintervalis
180seconds.
Remark: RETUNE mode functions for TA
duringTASEEKmodeonly.
DSP mode
RotatetheknobtochooseDSPsoundeffect:
POP-ROCK-CLASSIC-FLAT-DSPOFF
LOCAL/DX mode
Rotate the knob to choose tuner sensitivity
local or distant.
BEEP ON/OFF mode
Rotate the knob to choose button beep sound
on or off.
STEREO/MONO mode
Rotate the knob to choose FM stereo or
mono.
VOL LAST/ADJUST mode
Press MENU button to choose VOL LAST,
the turn-on volume level is the volume level of
latest power off.
RotateknobtochooseVOL ADJ,thenrotate
the knob to set the turn-on volume level.
SWC (Steering Wheel Control) SET
Rotatethe VOLknobstep by step, theLCD
screen will display the following options :
POWER->MUTE->SOURE->VOLUP->VOL
DN->SEEKUP->SEEKDN->BAND.
1. Selectanyofafunctionofaboveoptions,
then press and hold a button on the
steering wheel if your steering wheel
support the function, then the LCD screen
will display “SAVE OK“, it means this
function was saved into the button of the
steering wheel.
2. Repeat the abovestep1 tosetfunctions
of other buttons of the steering wheel.
3. T h e u n i t c a n e x i t s e t t i n g m e n u
automatically when no operation to the
unit.
4. After exit the setting menu and you can
operate the player by the buttons on the
steering wheel relatively.
5. If you want to change the setting, enter the
SWC setting menu, select a function on
the screen, press and hold a button on the
steeringwheelmorethan2seconds,then
the function is saved into the button on
steering wheel. At the same time, all other
functions saved in the buttons of steering
wheel settings are cleared, you need reset
them one by one once again, the method
issametotheabovestep1andstep2.
LOUD mode
Rotate the knob to choose loudness on or off.
SEEK 1 / 2 mode
SEEK1:Searchingstationwillstopwhenthe
next station is received.
SEEK2:Searchingstationwillstopwhen|<<
or>>|buttonisreleasedand next stationis
received.
12/24 HOUR SET mode
Press MENU buttonto enter12/24hourset
mode,rotatetheknobtoselect12or24hour
mode.