Installation guide

EN - 7
Radio Operation
Band Switch
PressBANDbuttonto select radio bandas
follows:FM1,FM2,FM3,WM1,WM2
TUNE
MANUSEEK:Press or to tune step by
step.
AUTO SEEK: Press or more than 2
seconds to seek automatically.
Store Station Manually
Press button1 - 6 more than 2 seconds to
store current station.
Press1-6brieytorecallpresetstation.
RDS service availability varies with areas.
Please understand if RDS service is not
available in you area, the following service is
not available.
RDS Basics
AF(Alternative Frequency):When theradio
signal strength is poor, enabling the AF
function will allow the unit to automatically
search another station with the same PI
(programidentication)asthe currentstation
but with stronger signal strength.
PS (Program Service name): The name of
station will be display instead of frequency.
AFMode:
AFon:AFfunctionisactivated.
AFoff:AFfunctionisdisabled.
Remark:AFindicatoronLCD will flashuntil
RDS information is received. If RDS service
is not available in your area, turn off the AF
mode.
REGMode:PressAFonthe remotecontrol
formorethan2secondstoswitchREGmode
on and off.
REG on: AF function will implement the
regional code (of the PI) and only stations in
the current region can be tuned automatically.
REGoff:AFfunctionwill ignore the regional
code (of the PI) and stations in the other
regions can also be tuned automatically.
Trafc Announcements
Some RDS FM stations periodically provide
trafcinformation.
TP(TrafcProgramIdentication)
Broadcastingoftrafcinformation
TA(TrafcAnnouncementsIdentication)
Radioannouncementsontrafcconditions
TAMode:HoldTA/AFbuttononthepanelor
press TA button on the remote control to turn
on/off TA mode. When TA mode is turned on,
the TA indicator will blink.
Whentrafcannouncementisreceived,theTA
indicator will display. The unit will temporarily
switch to the tuner mode (regardless of the
current mode) and begin broadcasting the
announcement at TA volume level. After the
traffic announcement is over, it will return to
the previous mode and volume level. When
TAisturnedon,SEEK,SCAN,AMSfunction
can only be received or saved when traffic
programidentication(TP)codeisreceived.
EON (Enhanced Other Networks)
Wh e n EON d a ta i s re ceived, the EON
indicator lights and the TA and AF functions
are enhanced.
TA:Trafficinformationcan bereceivedfrom
the current station or stations in other network.
AF:ThefrequencylistofpresetRDSstations