Operation Manual

EN - 12
PresstheMENUbuttonmorethan2seconds
to enter menu mode, then each press changes
themode,rotatetheVOLknobtoadjust.
TA mode
Rotate the knob to choose TA ALARM or TA
SEEKmode.
IftheTA(trafcAnnouncements)isturnedon
and there is no traffic program identification
code received in the specified time, no TA/
TP will display and either TA ALARM or TA
SEEKwillbeactivated.
TAALARMmode:Alarmisturnedon.
TA SEEK mode: TA SEEKis automatically
activated.
MASK mode
Rotate the knob to choose MASK DPI or
MASKALLmode.
In some cases, the AF function may be
influenced by some interference, examples
are signals with strong field but without the
RDS data.For this reason, the unit has two
options to avoid the above interference.
MASK DPI mode :
On ly  A F w hi ch  h as  d if fe re nt  pr og ra m
identicationismasked.
MASK ALL mode :
T he A F w hi c h h a s di f f er e n t p r o gr a m
identification andNORDSsignal withhigh
eldstrengthismasked.
Menu Function
Music Mode
A2DP
A2DPisshortforAdvancedAudioDistribution
Profile. The mobile phones supporting this
function can transmit stereo audio, whereas
the ones not supporting this function can
transmit mono audaio only.
AVRCP
AVRCP is short for Audio/Video Remote
ControlProle.Themobilephonessupporting
this function can control the playback of a
Bluetooth audio player.
General Notes for Bluetooth
1. Forsometypesofmobilephones,during
our test, after the mobile phones appear
connection successful, the unit still appear
waiting for pairing. At this time you must
ndtheunit’sBluetoothmodulenameon
the pairing list on your mobile phone and
select connecting in the submenu, then
theunitwillappearCONNECT.Otherwise,
the re i s no voi ce c omi ng o ut w hen
communicating, though the mobile phone
hasalreadydisplayedCONNECT.Some
mobilephones, whenitplayback A2DP,
youmustndtheunitnameinthephone’s
menu and reconnect (check your mobile
phone whether has theA2DP & AVRCP
functions).
Bluetooth Operation
2. Whenpairing,sometypesofmobilephone
hint that how to operate, for example,
when you make a phone call by the
unit,if the mobile phonevoicedosn’tbe
transferred to the unit, no voice comes out.
3. Depending on the mobile phone, if private
mode is selected, when you make a phone
call by the unit, or receive, the voice would
be transferred to the mobile phone. But
sometime the Bluetooth maybe disconnect
till the communication ends, then connects
your mobile phone to the unit automtically.
Some mobile phones maybe need pair
again.
4. For mobile phone, the Bluetooth device
na m e m u st b e pr im ar y sy mb o ls o r
numbers.Otherwise, someunpredictable
issues may occur during the Bluetooth
devices connecting and making phone
call.
5. After CONNECT, if no sound produced,
please check whether the Bluetooth stereo
audioonthephoneswitchedON.
6. Notallfunctionsaresupportedonall
phones. The compatibility of phones is
variable.