Operation Manual
EN - 6
General Operation
Power On/Off Button
Pressthe MUTE/ button to turn the unit on
when the vehicle ignition switch is on. Long
press to turn the unit off.
— — — — — — — — — — — — — — — — — — — —
Adjust Volume level
Rotate the VOL knob to adjust volume
level. Rotate it clockwise to increase and
anticlockwise to decrease the volume.
— — — — — — — — — — — — — — — — — — — —
Mode Button (SRC)
Press the SRC button to change between
Radio, DISC (when disc is in), USB(when
USB connected), SD/MMC card(when card
inserted), AUX play, BT audio, DAB.
— — — — — — — — — — — — — — — — — — — —
Disc Load/Eject
Load:Press toipdownthepanel.Insert
the disc into the slot .
Eject:Press toipdownthepanel.Press
toejectthedisc.
— — — — — — — — — — — — — — — — — — — —
Radio
Tonetunetheradio,press|<<or>>|briey.
Tosearchthestationautomatically,press|<<
or>>|formorethan2seconds.
Disc Playback
Trackskip:Press|<<or>>|brieytogotothe
next or previous track.
Trackseek:Press|<<or>>|formorethan2
seconds to seek the forward or previous track.
— — — — — — — — — — — — — — — — — — — —
AMS : Auto Memory Store
Press AMS briefly to scan the preset station
1-6 for5secondseach.Holdformore than
2 seconds, the 6strongestavailable station
will be automatically saved in the memory of
presetbuttons1-6.
— — — — — — — — — — — — — — — — — — — —
Auxiliary Input (optional)
Toaccessanauxiliarydevice:
1. Connect theportable audioplayer to the
AUX interface.
2. Press the SRC button to selectAux-In
mode.
3. Press SRC again to cancel Aux-In mode
and go to the next mode.
— — — — — — — — — — — — — — — — — — — —
Display Selector (DISP)
This unit can display either the clock time or
radio frequency/DAB frequency/CD player
functions. Ordinarily, the radio frequency/
DAB frequency or CD player track indication
is displayed, but the unit will display the time
when the DISP button is pressed. The time
will display for approximately 5 seconds then
return to the radio/CD or DAB player function
display.
Note:
DABInformation(PressDispKey):
Clock Disp->DLS Info ->PTY Disp->Signal
GroupNameDisp->FrequencyDisp->BitRate
Disp->ServiceNameDisp
— — — — — — — — — — — — — — — — — — — —
Setting the Clock
The correct time of day can be set by pressing
and holding the DISP button.
Tosettheclock,performthefollowingsteps:
1. Turnthevehicleignitionandradioon.
2. PresstheDISPbuttontoviewtheclock.
3. With the clock visible on the display, press
and hold the DISP button until the time
displayashes.
4. Within 5 seconds, rotatethe VOL knob
counterclockwisetoadjusttheminutesto
the desired setting. To change the hour,
rotate theVOLknobclockwisetoadjust
the hour to the desired time.
5. Press DISP button to confirm and exit
clock setting.