CAR MULTIMEDIA DVD/VCD/MP3 PLAYER RDD 788BT User’s Manual 1 9/DISP BAND PTY LOC 2 INT 7 TA 8 ST AF/ REG AS/PS 0/MUTE 3 RPT MODE 4 RDM 5 STOP 6 GOTO DVD/VCD/CD/CD-R/CD-RW/MP3/MPEG4 Compatible Anti-Shock Mechanism FM Stereo Radio RDS (Radio Broadcast System) Function Built-in Bluetooth hands-free system AV input/ output Socket Front Panel USB Input Port SD/MMC Memory card slot Sub-woofer Output Socket 3” Widescreen Digital TFT LCD Display Remote Control Fold Down Detachable Panel 4 x 75 W High Power
Page CONTENTS 01 Contents 02 Safety information 03 Installation 05 Using the detachable front panel 06 Wiring diagram 07 Operations 07 Location and function of keys 08 Us ing the remote control 09 General o perations 10 Radio o perations 11 RDS (Radio Data System) Operations 12 AV menu settings 14 Disc o perations 16 Special disc o perations 18 Data disc operations 19 USB operations 19 SD/MMC memory card operations 19 AV in operations 20 Bluetooth hands-free function
Safety information CAUTION: Mobile DVD player is a class 1 laser product. However this mobile DVD player uses a visible/invisible laser beam which could cause hazardous radiation exposure if directed. Be sure to operate the mobile DVD player correctly as instructed. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Do not open covers and do not repair yourself. Refer servicing to qualified personnel.
Installation Preparing New Discs with Rough Spots A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc. Therefore, remove the rough edges in advance by using a ballpoint pen or pencil as shown on the right. To remove the rough edges, press the side of the pen or pencil against the inside and outside edges of the disc.
1. DIN FRONT-MOUNT (Method A) Installation Opening This unit can be installed in any dashboard having an opening as shown below: 53 mm 182 mm Installing the unit Be sure you test all connections first, and then follow these steps to install the unit. 1. Make sure the ignition is turned off, and then disconnect the cable from the vehicle battery's negative (-) terminal. 2. Disconnect the wire harness and the antenna. 3.
Removing the unit 1. Make sure the ignition is turned off, and then disconnect the cable from the vehicle battery's negative (-) terminal. 2. Remove the metal strap attached the back of the unit (if attached). 3. Press the release button to remove the front panel. 4. Lift the top of the outer trim ring then pull it out to remove it. 5. Insert both of the supplied keys into the slots at the middle left and right sides of the unit then pull the unit out of the dashboard.
Wiring diagram RCA connector to rear left output (White) RCA connector to rear right output (Red) To External Microphone Sub-Woofer output socket (Green) FUSE 15A ISO CONNECTOR Radio Antenna Socket Video output socket 1 (Yellow) RCA connector to front left output (White) Video output socket 2 (Yellow) Parking brake wire B - ( Pink/Black ) RCA connector to front right output (Red) TO MEMORY B+ ISO connector: GROUND B- Part A: A1: No Connect A2: No Connect A3: No Connect A4: Battery B+ (Yellow) A5:
Operations Location and Function of Keys Front panel : 2 21 19 8 14 12 13 6 4 1 11 20 3 5 PTY LOC 7 9/DISP BAND 2 INT 7 TA 3 RPT MODE 4 RDM 8 ST AF/ REG 5 STOP 0/MUTE AS/PS 23 AV IN 6 GOTO 18 10 9 1 15 17 16 22 The car radio after removing the front panel: 24 26 25 27 28 Descriptions of Function Controls (1) Power on/off ( ) Button, MODE Button (2) Volume increase or decrease Knob, MENU Button (3) AF(List of Alternative Frequencies), REG(Regional Program) Button (4) 3 inc
Using the remote control 1 16 2 3 17 4 18 5 19 20 6 21 7 8 22 BT MENU 23 9 10 24 11 25 12 DEL 26 27 13 28 29 14 15 TA AF/REG PTY 30 Descriptions of Function Controls (1) Power on/off ( ) Button, MUTE Button (2) DISP(Display) (3) A-B Button (4) RPT (Repeat) Button (5) ZOOM(Zoom in /Zoom out) Button (6) Cursor Buttons ( ◄/►,▲/▼ ) (7) ENTER Button (8) SETUP Button, BT MENU Button Tune down, Seek down, previous track Button (9) Tune up, Seek up, next track Button (10) (11) TITLE( DV
2. Replacing the battery Replace the battery with the same type and the (+) side facing up. Adjusting the volume level Rotate the volume knob on the front panel , or use the VOL+ or VOL- button on the remote control to adjust volume level. Anti-theft LED Indicator Designed as a theft deterrent, the red LED will flash when the unit is turned off and the front panel is removed. ESP function This unit has the electronic shockproof feature.
Radio operations To select the radio mode Press the MODE button to access the source interface, then press the or button on the front panel or pressing the ◄ or ► button on the remote control to select select the radio mode. You will see the following radio screen on the TFT screen.
RDS (Radio Data System) operations Setting RDS mode Briefly press the AF/REG button to turn the RDS mode on/off. Whenever RDS is on, symbol “ AF ” appears on the TFT screen. Program name is displayed when receiving an RDS station. “ AF ” starts blinking if the broadcasting signals getting worse. “ ALARM ” will be displayed when an emergency broadcasting is received, meanwhile sound output level will be automatcially adjusted to the preset output level when the volume level is set at minimum.
After a few seconds,the unit will search your selected program type automatically. The PTY search stops when the unit finds a station with the selected program type, otherwise, the PTY search automatically exits to normal mode . During the PTY search process, press any key to stop the PTY search. AV menu settings AV Menu Overwiew You can adjust various settings of the unit from the AV menu. The AV menu contains the menu items and submenus shown in the figure below: 1.
Setup Menu Audio Menu Setup System Clock TIME.M 24 BEEP ON TA. VOL 30 10:06 Hour Minute 1. Press the / button on the front panel or press the / , ◄ / ► or ▲/▼ button on the remote control to select a menu item. 2. Rotate the volume knob on the front panel or press the VOL+ or VOL- button on the remote control to adjust the item you have selected. 1. Press the / button on the front panel or press the / , ◄ / ► or ▲/▼ button on the remote control to select a menu item. 2.
Picture Menu Disc operations PICTURE DEFAULT BRI 32 COL 32 CON 32 TINT 32 1. Press the / button on the front panel or press the / , ◄ / ► or ▲/▼ button on the remote control to select a menu item. 2. Rotate the volume knob on the front panel or press the VOL+ or VOL- button on the remote control to adjust the item you have selected. Bright: 0 ~ 63; Adjust this setting if the picture is too bright or too dark. Contrast: 0 ~ 63; Use this setting to adjust the contrast of the picture.
select a file or folder, then press the ENTER button to confirm your selection. If you select a file, it will be played. If you select a folder its contents(files) will be displayed in the file list. For CD: Single Track Selection Press the or button on the head unit to skip to the next or previous track.
Special disc operations Disc Menu Operations Menu-driven playback is possible while playing a disc with menu-driven features or when playing a VCD with PBC(Playback Control). 1. Press the TITLE/PBC button, a title list or disc menu will appear on the screen. 2. Use cursor button ( ▲/▼/◄/► ) to select a item on the menu you wish to play, then press the ENTER button to confirm your selection. (Note: On some disc, you can select the items with the numeric button.
In zoom in mode, press the cursor button ( ▲/▼/◄/► ) to move the zoomed-in area. Programmed Play Function Press the PROG button during playback to activate the programing editing interface as follows: For VCD/SVCD/CD: PROG PLAY For VCD/CD/MP3/JPEG: 2 7 8 9 PBC 1. Disc type 2. Playback information TT 1 / 3: Current title/ Total title; CH 1 / 1: Current Chapter/ Total Chapter; TRK 9 / 18: Current Track/ Total Track. 3.
- To search for a particular Title, Chapter, or Track 1. Use the cursor button ( ▲/▼/◄/► ) to highlight 1 (track number), 2 ( chapter number) or 4 (VCD track number). 2. Then enter a number with the number button to input the desired Title/Chapter, Track, then press the ENTER button to confirm your selection. - To search for a particular point by playing time 1. Use the cursor button ( ▲/▼/◄/► ) to move to 3 (time). 2.
USB operations Using the USB stick: This disc player features a front panel USB interface. A USB device can be connected to this port. When you insert a USB stick through the port, the DVD player will search for the MP3/WMA files and start to play them automatically. If you insert a SD/MMC card into the SD/MMC card slot or a disc into the disc slot while reading the USB stick, the unit will play the disc.
Bluetooth hands-free function When link up your mobile phone to this bluetooth hands-free system, you can dial or receive calls via this blutetooth device during driving. You can also transmit the audio data(music) from a mobile phone to the DVD tuner via this blutetooth device. Sound and picture will be automatically off when there is an in-coming call. Voice comes out from your car speakers and the built-in microphone receives your voice.
tooth menu as follows: PRESET (Preset phone number) : List of saved phone number, you can save 6 phone numbers total. RECEIVE (Received phone number): List of the latest 6 received calls. DIALED (Dialed phone number): List of the latest 6 outgoing calls. MISSED (Missed phone number): List of the latest 6 Missed calls. AUTO ON/OFF: Switch auto answer or manual answer. DEFAULT: Restore to the default setup.
Setup In DVD mode, when the disc is playing or in stop mode, press the SETUP button to enter the setup menu. 1. When the SYSTEM SETUP icon in the upper part of the menu is highlighted, use the ◄/► button to move between the different setting pages. 2. Press the ▼ button to move the cursor to the list of options below. Then you can use the ▲/▼ button to move between the different setup options 3.
Playing a video recorded in one aspect ratio on a monitor with a different ratio can result in some mismatches and undesirable display distortion or cutoffs. TV Screen Size Picture Format on Disc 4:3 Pan Scan 16:9 Letter-box Wide Screen 4:3 16:9 Read the following to assist you in setting up the TV type: 4:3 PS (PAN SCAN) Select this when connected to a conventional 4:3 size monitor. The picture will fill the entire TV screen.
Language Setup When you open the language setup page, you will see the following screen: 1. AUDIO OUT: Change among SPDIF/OFF, SPDIF/RAW and SPDIF/PCM. 2. KEY: Change among b, -4, -2, 0, +2, +4, #. LANGUAGE SETUP OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG EXIT SETUP ENGLISH GERMAN SPANISH FRENCH PORTUGUESE ITALIAN RUSSIAN POLISH This menu provides many choices for the menu, DVD and subtitle languages.
Playing MP3 discs Attachment About Parental Controls Commercially-recorded DVD discs have parental level assignments. The range of parental controls is from 1 to 8. In general, this range corresponds to established movie rating systems. Movie rating systems may vary depending on the country in which you live. At the bottom of this page is a chart showing the rating system and corresponding Parental Control ratings for the USA. The player can be set in a similar way.
“Progressive” (typically used for website display) or “lossless” (an older format which is rarely used today) JPEG files cannot be played. So be sure you are saving the files in the proper format. If you play a progressive or lossless JPEG image, a black screen will appear. When you next select a baseline image, you may experience some delays. Playing MPEG discs - This unit can play back MPEG 1 or 2 files with the extension code <.mpg>. - Audio stream should conform to MPEG1 Audio Layer 2.
No Sound ♦ Check the audio connections. The Player Does Not Respond to the Remote Control ♦ Aim the remote control directly at the sensor on the front of the player. ♦ Remove any obstacles which may interfere with the signal path. ♦ Inspect or replace the remote control battery. Picture is distorted or Only Black and White ♦ The disc format is not according to the TVset used (PAL/NTSC). Select the proper setting in the TV SYSTEM menu. No Audio at Digital Output ♦ Check the digital connections.
