RDD570BT DVD/MP3/MPEG4/USB/SD/MMC/WMA player with fm tuner INSTRUCTION MANUAL
Wa r n i n g s 1. Only connect this unit to a 12V DC power supply with negative grounding. 1 2. Never install this unit where the operation for safety driving is restrained. 3. Never use the video display function in the front when driving to prevent the violation of laws & regulations and also to reduce the risk of traffic accident except using the rear view video camera. 2 3 4. Never expose this unit, amplifier, speakers to moisture or water to prevent electronic sparks or fires. 5.
Precautions 1. Never disassemble or adjust the unit without any professional guide. For details, please consult any professional car shop / dealer for inquiry. 2. If the front panel or TFT monitor is squalid, please use a clean silicone cloth and neutral detergent to wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol for cleaning may result in scratching or decoloration to the applicant. 3 .
Declaration This product incorporates copyright protection technology that is protected by U.S patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Contents Before using Front Panel......................01 Remote Control................03 Basic operations Power on/off.................... 06 Mute............................... 06 Volume adjustment...........06 Open SOURCE MENU...... 06 Playing source selection... 06 Display system time..........07 Using the TFT monitor.......07 Reset the unit...................07 Radio mode Select radio as playing source.............................08 Select one radio band....... 08 Auto tuning......................
Contents Rotate picture..................20 Select picture slide mode. 20 Playback information display............................20 Bluetooth mode Select Bluetooth as playing source.............................21 Function icons................. 21 Work modes of Bluetooth module............................21 Phone mode.................... 21 Music mode.....................23 Other modes AUX................................24 Camera...........................24 NAV.................................
Before using Front Panel ② ① 15 14 16 ① 15 ② 14 ③ ⑬ ④ ⑤ RPT ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ 1. [AS/TILT+] Key: Auto Save / Increase display angle 2. [BAND/TILT-] Key: Change radio band / Decrease display angle 3. [ ] Key: Flip the front panel 4. [VOL] Knob Key: Adjust volume / Pop-up EQ menu 5. Reset the unit 6. [ /SRC] Key: Unit power / Switch to the current mode and main menu 7. [MUTE/ ] Key: Mute audio outputs / Call(long press) 8. [RPT/ ] Key: Enter the repeat mode/Hangup(long press) 9.
Before using 13. Eject disc 14. [OPEN/Close] Key: Open / Close the TFT monitor 15. [DISP/WIDE] Key: Display information / Change display mode Auxiliary LCD 5 LOUD 1 2 3 4 1. Disc indicator Light up when one disc is inside; Light off when no disc is inside. 2. Repeat mode indicator Light up when repeat mode is on; Light off when repeat mode is off. 3. Main display area Display characters, playback time, tuning frequency, clock and other text information. 4.
Before using 03
Before using 04
Before using Notes of remote control using 1) Aim the remote control at the remote sensor on the unit. 2) Remove the battery from the remote control or insert a battery insulator if the battery has not been used for a month or longer. 3) DO NOT store the remote control under direct sunlight or in high temperature environment, or it may not function properly. 4) The battery can work for 6 months under normal condition. If the remote control can't work, please change the battery.
Basic operations Power on / off Press any key on the front panel or the [POWER] key on the remote control to turn on the power under standby mode. The unit goes back to the last status after power on. Press and hold the [SRC] key on the front panel or press the [POWER] key on the remote control to turn off the power under work mode. Mute Press the [MUTE] key on the front panel or remote control to mute the volume from the unit.
Basic operations Display system time Press and hold the [DISP] key on the front panel to switch the display information between system time and playing source when the TFT monitor is closed. Using the TFT Monitor Open / Close monitor Press the [OPEN/CLOSE] key on the front panel or remote control to push the display panel out or in. Change the monitor tilt angle Due to the inherent character of LCD, you will get different vision impression s when you watch it from different angles .
Radio mode Select radio as playing source Open the SOURCE MENU and then touch RADIO. Select one radio band Press the [BAND] key on the display panel or remote control or touch the [BAND] icon on the user interface to select one radio band among FM1, FM2, FM3, AM1 and AM2. Auto tuning Press the [ ]/[ ] key on the display panel or remote control or t ouch the [ ] / [ ] icon on the user interface to seek a higher / lower station.
Radio mode . Manual save When one expected radio station has been detected…… (1) Press the [ MEM ] icon on the user interface and the preset menu will be opened. (2) Press one preset button among P1~P6. (3) If you want to abort, press the [Exit] button. Preview scan Preview scan searching is such a process that the searching pauses when a station is received and then played for 5~10 seconds. After being played, the unit continues the process until the whole band is detected.
RDS operations The unit provides basic functions of RDS, including PI (Program Identification), radio station name , RT (Radio Text), CT (Clock Time), AF (Alternative Frequency), TA (Traffic Announcement) and PTY (Program Type) Selection. AF function Alternative Frequencies Lists are used for the same program service and used in conjunction with the PI code (Program Identification code) to assist automatic tuning.
RDS operations PTY function PTY is the abbreviation for Program Type which is a code defining the type of program being broadcast (e.g. News or Rock). Six PTY options will display on the screen. To view more PTY options, touch the scroll bar and arrows on the screen. When one PTY option is touched (e.g. News), auto search for next available PTY by increasing tuning frequency until the PTY of the next station matches the current.
Disc mode Insert a disc Upon inserting a disc, the unit will switch to disc mode automatically. Notes: ① Please confirm whether there is a disc in the unit before you insert another one. ② Some recorded discs, such as CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW cannot be played back because of different recording status. Otherwise, the discs without being closed could not be played back. ③ About the cautions of disc using, please refer to the appendix. Eject the disc Press the [ disc.
Disc mode Onscreen control buttons Disc type MP3/WMA CD VCD Numeric keypad Numeric keypad Numeric keypad DVD MPEG Picture Numeric keypad Numeric keypad Numeric keypad Icon Setup menu Setup menu Setup menu Setup menu Setup menu Setup menu / Fast forward Fast forward Fast forward Fast forward / / Fast rewind Fast rewind Fast rewind Fast rewind / Previous Previous Previous Previous Previous Previous Next Next Next Next Next Next Play / Pause Play / Pause Play / Pause Play / Pause
Disc mode Suspend playback Press the [ ] key on the front panel or remote control or open the onscreen control buttons menu and then touch the[ ] button. To resume normal play, repeat the above operation. Stop playback To stop playback, press the [■] key on the remote control or open the onscreen control buttons menu and then touch the[■] button.
Disc mode Repeat playback Press the [RPT] key on the remote control repeatedly or open the onscreen control buttons menu and then touch the [ ] button repeatedly to alter repeat mode according to the following table.
Disc mode Direct search When a DVD, VCD or CD disc is played back, you can search for a particular chapter / track by pressing the numeric keys of the remote control. For example, if you want to select the 15 th track, you should press numerical key [1] and [5]. GOTO search (1)Enter GOTO search mode Press the [GOTO] key on the remote control to open search menu. For DVD, you can search according to title, chapter and time.
Disc mode Select multi-angle views Press the [ANGLE] key on the remote control repeatedly to choose a s hooting angle during the playback of a DVD disc or video file containing multi-angle views. Select audio channel For DVD containing multi-language audio files, press the [AUDIO] key on the remote control repeatedly or open the onscreen control buttons menu and then touch the [AUDIO] button repeatedly to change dialogue language.
Disc mode Playback information Touch the top center area of TFT LCD when playing back DVD and VCD discs and the playback information will be displayed on the top area of the TFT. For DVD 1 2 3 4 5 6 7 8 DVD Video Time 00:00:59/00:00:43 Title 15/30 Chapter 1/2 Audio Subtitle Angle Bitrate 1/1 6 ch Eng Off 1/1 0.000Mbps (1) Disc type. (2) Elapsed time of the current title. (3) DVD Title information. “5/8” indicates that this DVD has 8 titles and the title playing back now is the fifth title.
SD/USB mode Select SD/USB as playing source Method 1: SRC SRC Repeatedly Repeatedly remote control front panel Method 2: Open the 'SOURCE MENU' and then select ' SD ' . Notes : ① The unit will switch to SD card mode or USB mode after a SD card or USB device has been inserted . ② The unit supports hot swap. Using the touch screen controls The operation is the same as DVD mode . Onscreen control buttons Onscreen control buttons under SD/USB mode are the same as disc mode.
SD/USB mode Play the next or previous file The operation is the same as disc mode. Repeat playback The operation is the same as disc mode. Random playback The operation is the same as disc mode. Intro playback The operation is the same as disc mode. Search for a particular file The operation is the same as disc mode. GOTO search The operation is the same as disc mode. Zoom in/out The operation is the same as disc mode. Rotate picture The operation is the same as disc mode.
Bluetooth mode Bluetooth is a wireless transmission way for short distance operating at 2.4GHz. The bluetooth module can connect with the mobile phones having bluetooth function. After connecting, you can control your mobile phone through the unit. As different mobile phones provide different bluetooth functions, so not all of the functions undermentioned are available to different phones. Please read through the operation manual of the mobile phone in use at first .
Bluetooth mode ③ After the name of the Bluetooth module appears on the pairing list on your mobile phone, you should select it. At this time, a pairing code is required. The Bluetooth module will exit pairing mode if there is no pairing instruction from your mobile phone during the pairing time (90s) and 'Phone Pairing Fail' is displayed on the screen. ④ Enter the pairing code (1234 by default) to initiate the pairing process. The paired mobile phone name will display on the screen.
Bluetooth mode Voice transfer While talking, touch the 'Voice transfer' icon on the screen to transfer audio from the unit to your mobile phone, and touch again to transfer audio from your mobile phone to the unit. Note: Some mobile phones will transfer audio from the unit to themselves once the incoming call is answered. Microphone mute While talking, press the microphone mute icon on the screen to mute the microphone built in the unit.
Other modes AUX External peripheral devices with RCA audio and video outputs can be connected with the unit. To enter AUX IN mode, open the SOURCE MENU and then touch AUX IN. C amera This player is “camera ready”. Before accessing any camera features, you must purchase and install a rear video camera. Once the rear camera is connected and operating properly, the CAMERA source mode will become active.
Setup Setup procedures (1)Enter setup mode Press the [SETUP] key on the remote control or touch the setup icon [ ] on the user interface. The following menu appears after entering the setup mode. The GENERAL sub-menu is highlighted by default. SETUP MENU General Bluetooth Rating Hardware P.VOL Language Clock Mode 12Hr Clock 11:18 Audio Back AM Tuner Region S.Amer2 Beep Off TS CAL (2)Select one sub-menu Press the direction keys on the remote control.
Setup Language ● OSD Select one language of system menu display. ● DVD Audio Select one dialogue language of DVD disc. Note: If the DVD disc does not contain the selected language, the dialogues you listening to will be in default language. ● DVD Subtitle Select one subtitle language of DVD disc. Note: If the DVD disc does not contain the selected language, the subtitle will be displayed in default language. ● Disc Menu Select one language of DVD MENU display.
Setup ● Pairing code You should enter the pairing code when the bluetooth module is pairing with another bluetooth device. The original paring code is 1234 and you can change the paring code when the bluetooth module is on. Rating Some DVD discs have built-in parental lock which prevents children to watch some scenes as force or eroticism especially. ● Set Password The original password of the unit is null . You should set a new password ASAP.
Setup Procedures of changing the rating: (1) Open the parental lock According to the same method mentioned in the first step of changing password. ( 2 ) Change the rating Select an appropriate rating from the 'rating' list. ( 3 ) Close the parental lock Repeat the operation of the first step to enter a 6-digit password (old or new) and then confirm. The parental lock is closed. ● Load Factory To restore the default settings relating with DVD playback (e.g.
Setup P.VOL P.VOL means Programmable Volume. You can balance the volume among different audio sources using this function. ● Source Select one playing source that you want to set relative volume. ● Level You can set relative volume level from -6 to 6. TS CAL When the touch function is not sensitive or valid, you should calibrate the touch screen by this function. Calibrate the touch screen just following the screen introductions after entering the TS CAL mode.
EQ Audio control allows you to easily adjust the audio system to get the best possible sound effect. ( 1) Enter the EQ setup mode Press the [SEL] key on the remote control or touch the EQ icon in the user interface and the following interface will display on the screen . EQ selection EQ +14 BAL-FAD USER + + + 0 + F 0 -14 R L EQ parameters - - - BASS MID TREB -14 - Fader / Balance adjustment area R SUB ( 2) Select EQ mode Touch the EQ selection bar repeatedly and the EQ mode will change.
Troubleshooting What appears to be trouble is not always serious. Please check the following points before calling a service center. Problem Cause Corrective action General Unit can not power on Remote control does not work No/low audio output Poor sound quality or distortion Tel-Mute malfunction Unit fuse blown. Install new fuse with correct rating. Car battery fuse blown. Install new fuse with correct rating. Illegal operation Reset the unit. Battery depleted. Change the battery.
Troubleshooting 常见故障排除向导 (Continued) Problem Cause Corrective action Disc playback Cannot insert disc Disc does not play back A disc inside the unit already. Eject current disc and insert new one. Disc is warped or scratched. Use disc in good condition. Disc is dirty or wet. Clean disc with soft cloth. Incompatible disc is used. Use compatible disc. Disc is inserted upside down. Insert disc with label side up. Disc region code is not compatible with unit. Use disc with proper region code.
Device connections Notes of connection This unit is designed to be used in a vehicle with a 12-volt battery and negative grounding. Before installing this unit to a recreational vehicle, a bus, or a truck, make sure the battery voltage is appropriate for this unit to be used, otherwise, install a transformer by professional to convert the output voltage to 12V. To avoid short circuit in the electrical system, ensure that the negative battery cable is disconnected before installation.
Device connections Control Cables Auto Brightness Control To avoid the display being too bright at night time, if the headlight cable is connected to ILLUMI, turning on the headlight will dim the backlight of the TFT LCD and vice versa. Telephone Mute If the MUTE cable is connected to a car phone, other audio outputs mute when one call is received by the car phone.
Device connections Parking Brake Cable Connections Parking Brake Lead Green Wire 2A Battery Brake Light Parking Brake Switch Car Frame Parking Brake Switch Reverse Driving Cable Connections Reverse Driving Signal Light Car Frame Pink Cable Reverse Driving Cable Car Battery P R N D 2 L Gearbox 35 Car Frame
Installation and uninstall Notes of installation 1) Before installation, please make sure proper connections are conducted and the unit operates normally. Improper connection may result in damage to the unit. 2) Use only accessories designed and manufactured for this unit and other unauthorized accessories may result in damage to the unit. 3) Before installation, please fasten all power cables.
Installation and uninstall Dashboard Rubber Sheath M5 X 24 Mounting Bracket M2 X 2 Long Assemble Bar （Picture 2） ( 4 ) Insert the unit into the bracket, fasten the M4×6 screw to the fireproofing board available at the back of the dashboard, and use 4 pieces of M2×2 screw to lock the assemble bars and the mounting bracket in position. Note: According to the depth of the opening, use different length of assemble bar accordingly.
Installation and uninstall The assembly step of detached panel 1、Press this button,It's ok when heard "KA KA". 2、Grasped the right-end of the knock-down panel, you can remove the panel by upward direction, which is like the following picture.
Installation and uninstall The assembly step of detached panel 1、Put the knock-down panel on the fixed panel by downward direction. 2、（1） Before the next assembly, make sure this place is ok. RPT （2） This complexion is NG. DVD-6666M RPT 3、Pressed both sides of the knock-down panel, make sure it's OK.
Installation and uninstall Trim Ring installation Attach the trim ring around the front panel with two indentions on one side facing upwards Uninstall Disassemble trim ring (1) Push the trim ring upward and pull out the upper part. (2) Push the trim ring downward and pull out the lower part. Disassemble the unit (1) Unscrew the 4 pieces M2×2 screws. ( 2 ) Use a screwdriver to bend straight the bended mounting tab and tip out the unit from the mounting bracket.
Specifications General Reference Supply Voltage.....................................................12V(DC) Operating Voltage Range..........................................10.5～15.8V(DC) Max Operating Current.................................................................10A Grounding System.......................................Car Battery Negative Pole Installation Dimension(W×H×D)...............178 mm×50mm×(165+25)mm Installation Angle....................................................................
Specifications Video Normal Video Input Level ( CVBS ) ...........................................1.0±0.2V Video Input Impedance................................................................ 75Ω Video Output Impedance..............................................................75Ω Video Output Level...............................................................1.0±0.2V (Under normal video input level) TFT Monitor Screen Diagonal....................................................................
Appendix Region Code According to DVD sale region, the whole world is divided into six regions. A DVD disc can be played back only when its region code is compatible with that of the player in use.
Appendix Wiring Diagram YELLOW VIDEO OUT YELLOW CAMERA MONITOR BATTERY CAMERA BLACK NAV BOX PINK HAND BRAKE INDICATION GND PRK SW ANT PARKING BRAKE SWITCH MICROPHONE BT ANT 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 16 PIN POWER BATTERY GND RED AUX IN R GND WHITE AUX IN L HEAD LIGHT SWITCH HEAD LIGHT YELLOW AUX IN VIDEO IGNITION SWITCH CAR TELEPHONE AV SYSTEM BLACK ILLUMI ORANGE ACC RED MUTE BROWN P.CONT BLUEWHITE REVERSE PINK ANT.
P/N:12707500XXXX
