Operation Manual

27
3. Get to the list of results:
 After entering a couple of characters, the names that match the string appear in a
list.
 Tap to open the list of results before it appears automatically.
4. Select the street from the list.
5. Enter the house number:
1. Tap .
2. Enter the house number on the keyboard.
3. Tap to finish entering the address.
6. The map appears with the selected point in the middle. Tap from the
Cursor menu. The route is then automatically calculated, and you can start navigating.
3.1.2.2 Entering an address if house numbering is restarted
There are long roads where house numbering is restarted at some point. This way the same house
number can appear twice or even more times on the same road. If this is the case, after entering the
house number, you need to select the appropriate address by the district/suburb information.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons: , .
2. By default, CALIBER Navigation proposes the country/state and settlement where you are. If
needed, tap the button with the name of the country/state, and select a different one from the
list.
3. If needed, change the settlement:
 To select the settlement from the list of recently used ones, tap the button.
 To enter a new settlement:
1. Tap the button with the name of the settlement, or if you have changed the
country/state, tap .
2. Start entering the settlement name on the keyboard.
3. Get to the list of search results:
 After entering a couple of characters, the names that match the string
appear in a list.
 Tap to open the list of results before it appears
automatically.
4. Select the settlement from the list.