Warnings When Driving CAUTION Keep the volume level Iow enough to aware of the road and traffic conditions. When Car Washing Do not expose the product to water or excessive moisture. This could cause electrical shorts, fire or other damage. CAUTION In order to avoid any accident, the driver must not watch video while driving. This unit is designed to not allow watching video while driving. Park your car in a safe place and engage the 'parking brake' before watching video.
Installation Installation using the screw holes on the side of the unit INSTALLATION CAUTION 1. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly. 2. Use only the parts included with the unit to ensure proper installation. The use of un-authorized parts can cause mal functions. 3. Consult with your nearest dealer if install-ation requires the drilling of holes or other modifications of the vehicle. 4.
Installation Detach the Front Panel Press the REL button on the front panel to release the panel, and push the left side of the panel rightward, then pull the panel towards you to disengage it from the chassis. 1 2 Resetting the unit After releasing the front panel, use a stick or any non-metalic object to press & hold the reset button for five seconds to reset the unit.
Connecting the System Back Up Camera Wire (Orange) Gearbox switch Reverse gear signal Back Lamp Lead + Brake Switch P arking Wire (Pink) 3 4 5 6 7 8 5 7 8 4 A FUSE 1 2 FUS E Ground B ISO Male Connector (not included) PIN WIRE COL OR A4 YELLOW A5 BLUE Audio In R Video out 1 Sub-W Audio In L Front RCA L Rear RCA L Video In Front RCA R Rear RCA R Antenna Extender Cable Extrenal Microphone (B lac k) Camera In FUNCTION/LABEL BATTERY(+) Camera In CONNECT TO SYSTEM CONTROL TERMI
Overview Of The Main Unit 1 2 3 4 5 6 7 7 8 FU NC XB S BAND SOURCE SUB-W IN FO LI S T EQ DN DN SETUP 15 14 13 12 UP 9 CLOCK PUSH 1 PUSH 11 10 9 8 Release Press to detach the front panel. 2 Power Press to turn the unit on, press and hold turn the unit off. 3 FUNC/XBS Press this button enter into the function mode.
Overview Of The Remote Control 9 1 6 2 12 DIMMER 7 FUNCTION FUNC LIST 3 VO LUME 4 5 14 13 15 OK SETTING 9 10 BAND XBS EQ DVD TITLE DBSS 16 Under Media playback mode, press this button to Pause or Resume play. 10 DVD AUDIO Under DVD playback mode, press this button to select audio language or audio channel. 11 DVD MENU Under DVD mode, press this button access into DVD main menu. 12 LIST Under tuner mode, press this button to show the List of stored station.
Adjust Settings Press the SETUP button on the front panel to access into the setup mode. User can rotate the Encoder Volume Knob to select the options, then press to confirm. 2. Press RESET button to restore the above settings into default NOTE Hold & press LIST button on the front panel is to quick get into the Preset Equalizer Setting menu.
Adjust Settings Adjust System Setting Adjust Dimmer Setting User can rotate the Encoder Volume Knob to select the System Settings, then press to enter into adjust the below options: Press button to adjust the TFT backlight level between High or Low. [Sound]: User can rotate the Encoder Volume Knob to select the Sound mode, and press to turn on or off the selection. [Date/Time]: Rotate the Encoder Volume Knob to adjust the Date / Time, and then press to confirm.
Tuner Operations Tune To Preset Station Adjust Tuner Function Press the FUNC button on front panel under Tuner playback mode access into the Tuner Function menu. User can rotate the Encoder Volume Knob to select the below options: Press the LIST button on front panel under Tuner playback mode to get into the preset stations list, and user can use the Encoder Volume Knob to select which preset station he would listen to, and press to confirm the selection.
About RDS The RDS (Radio Data System) function operates only in areas with FM AF (Alternate Frequencies) stations broadcasting RDS signals.
Media Player Operations (Disc/USB/SD Card) This unit can play various video / audio stored into Disc / USB or SD Card on Media Player. USB Device Operation Insert the USB Device You can play commercially available audio CDs and these Discs: Open the cover marked on the front panel, insert the USB device into the USB socket. The unit starts playing from the USB device automatically.
Media Player Operations (Disc/USB/SD Card) Repeat Media Playing [Repeat CH]: repeat playback the current the chapter. Repeat [Repeat TT]: repeat playback the current title. During the media playback, press the FUNC button on front panel to access into Media Function menu to adjust the different Repeat mode. [Repeat Off]: cancel all the repeat function. For MP3/WMA/CD mode DVD Audio [Repeat All]: play all tracks repeatedly During DVD playback to change the audio language (DVD/Divx only).
AV-In Mode Select the AV Mode About the Parking Wire You can connect up to 2 optional devices. Press the SOURCE button on front panel to enter into the Source menu to select the AV-In mode. AV1- IN=Front panel AV-In AV2-IN=RCA back of unit AV1-IN CAUTION In order to avoid any accident, the driver must not watch video while driving. This unit is designed to not allow watching video while driving. Park your car in a safe place and engage the 'parking brake' before watching video.
Bluetooth Operations 13. When in telephone mode, during talking, it is highly recommended to set the volume to below “30” in order to achieve the best sound quality. As if the volume is too high, it may create unwanted echo inside the car, and 1. When user use our Bluetooth HEAD UNIT, please make sure the mobile this unwanted echo may feedback into the microphone. phone you use must/does support Bluetooth functions (Headset or Handsfree profiles or both) 14.
Bluetooth Operations Answering An Incoming Call Handfree Operations When there is an incoming call, the display will show the Phone Number. If the incoming call has no caller I.D. number, the LCD will display “ Phone In ”, user can press the button on front panel to answer / accept the call. P airing The Bluetooth System Between Mobile Phone & The Unit Open your Mobile Phone and switch Bluetooth to on, and search Bluetooth device. User can use the Encoder Volume Knob to adjust the volume level.
Bluetooth Operations Making A Call Bluetooth Audio Streaming A2DP User can use his / her Mobile Phone to dial and make an outgoing call. Once the user has completed the dialing, the below display will show on TFT: If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music stored on the device through the unit.
Product Information Radio General Power Supply 12 V DC (11-14 V), Negative Ground Fuse 15A Suitable Speaker Impedance 4-8 Power output Mosfet 75W x 4 channels Pre-AMP output voltage 2.0 V (USB play mode; 1KHZ, 0dB, 10k load) Aux-In level Subwoofer output voltage -FM Frequency Range 300mV -AM(MW) Frequency Range 522 -1620KHz Usable Sensitivity Better than 45dB USB devices 2.0 V (USB play mode; 120HZ, 0dB, 10k load) USB flash memory TFT Screen Section USB 1.1, & 2.
Product Information Supported MP3 disc format Supports Formats • • • • • • • • • • • • MP3/WMA bit rate (data rate): 32-320 Kbps & VBR WMA Version V9 or earlier Directory nesting up to a maximum of 8 levels Number of albums/ folders:maximum 99 Number of tracks/titles: maximum 999 Supported sampling frequencies: 32 kHz, 44.
Troubleshooting Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. No power or no sound Car engine is not on. Turn the car engine on. Cable is not correctly connected. Check connections. Fuse is burnt. Replace fuse. Volume is in minimum. Adjust volume to a desired level. If the above solutions cannot help, press the RESET button. Ensure that the track played is of a compatible format.