Unit installation

Troubleshooting
Before going through the check list, check wiring connection. If any of
the problems persist after check list has been made, consult your
nearest service dealer.
No power or no sound
Noise in broadcasts
Cannot play disc
Car engine is not on. Turn the car engine on.
Signals are too weak. Select other stations with stronger signals.
Cable is not correctly connected. Check connections.
Check the connection of the car antenna.
Fuse is burnt. Replace fuse.
Change broadcast from Stereo to mono.
Volume is in minimum. Adjust volume to a desired level.
If the above solutions cannot help, press the RESET button.
Ensure that the track played is of a compatible format.
The CD Skips tracks
Preset stations lost
Display show ERR-1
Display show ERR-3
Display show ERR-5
Disc cannot be ejected.
Ensure that the CD is not damaged or dirty.
Battery cable is not correctly connected. Connect the battery cable
to the terminal that is always live.
The disc, USB or SD device cannot be red in two minutes
USB/SD data error.
Communication error or component is damged.
Disc is upside down. Ensure the printed side is facing up.
Press and hold .
Ensure that random mode is deactivated.
Disc is upside down. Ensure the printed side is upwards.
Disc is dirty. Clean the disc with a
the disc o utwards from the center.
clean,soft,lint-freecloth.Wipe
Disc is defective. Try another disc.
Incompatible disc is used. Try another disc.
Disc rating exceeds the restrict setting.
to lower one.
Change the rating settings
Disc region code is not compatible with
proper region code.
the unit. Use disc with
E - 19