RDD883BT OPERATING INSTRUCTIONS DVD/VCD/CD/MP3/USB/SD/MMC PLAYER FM/AM TUNER
Safety Precautions Never expose this unit, amplifier, and speakers to moisture or water for preventing electric sparks or fires. Thank you for purchasing this product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this manual in a safe place for future reference. Only connect the unit to a 12-volt power supply with negative grounding.
Safety Precautions Contents (continued) Warning Safety Precautions .......................................1 Operate the unit correctly according to the manual instruction to prevent unnecessary problem. Features .......................................................3 Panel Controls ..............................................4 Caution Remote Controls...........................................5 This product is a CLASS 1 LASER PRODUCT.
Features DVD-R/RW compatibility Button Operation Explanations It is possible to playback DVD-R/RW discs recorded with the video format and Video Recording format. Touch panel key operation It is possible to operate this unit by using touch panel key. Video CDs featuring PBC compatibility Some frequent operations 1) Move cursor It is possible to playback Video CDs featuring PBC (playback control). WMA and MP3 compatibility It is possible to playback WMA and MP3 files.
Panel Controls Press POWER button (3) to turn on/off the unit. 1. 2. 3. 4. Press button (9) to open the panel. 10 11 12 13 - Touch panel - Remote sensor - Turn the unit on/off - Select the following sources: >Radio >Disc (when disc inserted) >C a r d ( w h e n S D / M M C c a r d inserted) >USB (when USB connected) >AV1 >AV2 >Blue-tooth 5. - Adjust brightness of screen 6. - Press to adjust volume level. 7. - Mute 8. - Reset 9.
Remote Controls 1. - Select the following sources: >Radio >Disc (when disc inserted) >Card (when SD/MMC card inserted) >USB (when USB connected) >AV1 >AV2 >Bluetooth 2. - Disc eject 3. - Menu (DVD) 4. - Title (DVD) 5. - Goto search 6. - Radio band - Video system PAL/NTSC/ AUTO 7. - Sound/display setting - Setting menu (press 2 sec.) 8. - System setup 9. - Close the panel step by step 10.- Open the panel step by step 11.- Zoom (DVD/VCD) - Dial/Receive call 12.- Enter 13.- Menu cursor 14.- Stop/Return 15.
Remote Controls (continued) Replacing the lithium battery of remote control unit When the range of the operation of the card remote control becomes short or no functions while operating, replace the battery with a new lithium battery. Make sure the battery polarity replacement is correct. 1. Open the back cover of the remote control unit. 2. Insert the button-type battery with the stamped (+) mark facing upward. 3. Close the back cover. Warning • • • • Store the battery where children cannot reach.
Basic Operations Turn on/off the power When parking brake applied 1. Press button to turn on the unit. The unit goes back to the last status after power on. 2. When on, press button to turn off the unit. 1. If 'PRK SW' cable is connected to hand brake switch, the video display of the TFT monitor will be controlled by driving status, system setup and input video sources. 2.
USB /SD/MMC Card Operation Using SD/MMC Card USB/SD/MMC Notes 1. To open the panel first, press the button on the panel. Insert an SD/MMC card into the corresponding slot, the unit will load the files automatically. 2. To remove the card, you should first select another source, in order to avoid damaging the card, then slide down the panel, press the card slightly, and take off the card after it popped out.
Disc Operation Insert a disc Press on the panel to slide down the panel. Insert a disc into the slot, and the unit will change to disc mode automatically. Note: • • • Please confirm whether there is a disc in the unit before you insert another one. The unit will exit current playing source and enter DVD mode when one disc is inserted. Some recorded discs, such as CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW cannot be played back because of different recording status.
Disc Operation (continued) Disc and file NOT supported Repeat *.AAC, *.DLF, *.M3U, *.PLS, MP3 PRO files and files with DRM. Open session discs. During playback, press [ REPT ] or [ repeatedly. - RPT icon will appear on the display. - For VCD/CD: Display appears REP 1 OFF REP ALL - For DVD: Display appears CHAPTER REP ALL OFF TITLE - For File disc: Display appears REP 1 REP DIR REP ALL OFF Stop playback temporarily - During playback, press to pause playback. The sound will be muted.
Disc Operation (continued) DVD Audio Select DVD Playback Menu Press [ AUDIO ] to select audio language to listen if the DVD has multiple audio languages. During playback touch the center of the screen: VCD Audio Select Press [ AUDIO ] to select audio channel to listen. L R Stereo DVD Subtitle Select Press [ SUBTITLE ] to select the subtitle language to show if the DVD has multiple language subtitles. DVD Angle Select Touch the icon to access desired function. 1. Subtitle select 2.
Disc Operation (continued) CD/MP3/MP4/PHOTO Menu PHOTO Intro Menu During playback touch the center of the screen: During intro photos, touch the center of the screen: MP3 Hero.mp3 Long night.mp3 All Leave me alone When I’m gone Touch to access desired function. 1. Rotate the picture anticlockwise/clockwise. 2. Mirror the picture vertically/horizontally 3. Zoom 4. Previous/next picture 5. Play/Pause 6. Stop 7. Display audio/video setting menu 1. Display source menu 2.
Tuner Operation RDS Basics Radio Menu RDS service availability varies with areas. Please understand if RDS service is not available in your area, the following service is not available. RADIO AF Mode AF (Alternative Frequency): When the radio signal strength is poor, enabling the AF function will allow the unit to automatically search another station with the same PI (program identification) as the current station but with stronger signal strength. Touch to access desired function: 1.
Tuner Operation Bluetooth Operation (continued) TA SEEK/TA ALARM Note: For your safety, avoid talking on the phone as much as possible while driving. Touch [ ] button on the source menu to enter the unit system setup menu, touch [Radio] to enter radio setting menu, then select TA Seek or TA Alarm. If the TA (Traffic Announcements) is turned on and there is no traffic program identification code received in the specified time, no TA/TP will display and either TA ALARM or TA SEEK will be activated.
Bluetooth Operation (continued) 11.Page up 12.Page down 13.Phone book 14.Received calls 15.Dialled numbers 16.Missed calls 17.Show previous menu After pairing successfully, the Bluetooth icon lights up. Touch and hold button to disconnect.
System Setup Audio/Video Setting BT You have 2 methods to enter audio/video setting menu. Method 1: Touch SEL on the TFT. Method 2: Press the SEL button on the remote control. Pair Auto C onnect Auto Answer Reset 1 BT TV OTHER 1. Display source menu 2. Current time 3. Adjustable options 4. Page up/down 5. Touch to access general setting options 6. Touch to access language setting options 7. Touch to access DVD setting options 8. Touch to access radio setting options 9.
KEY PAD System Setup KEY PAD (continued) 1 13800138000 2 13800138000 3 Subw Volume: , 14 25 36 When the subwoofer on, touch [ ] / [ ] to 4 5 6 7 8 9 adjust subwoofer volume. * * 7 8 0 9 # Mirror: On, Off 0 # Touch [On] or [Off] to select mirror or normal display.When you enter MIRROR IMAGE ON mode, the video of camera is mirror image. to confirm. The original password is “0000“. After you enter the password, [UNLOCK] appears on the screen, now you can adjust the rating level.
System Setup Device Connections (continued) Notes of connection announcement on or off. • TA mode: Seek, Alarm Touch [Seek] or [Alarm] to select traffic announcement’s active mode. REG: On, Off Touch [On] or [Off] to select whether identify the regional code when tuning. • RDS CT: On, Off Touch [On] or [Off] to select whether synchronize clock time with the signal source. • BT Setting Pair: On, Off Touch [On] or [Off] to choose pair automatically on or off.
Device Connections (continued) Parking Brake Cable Connections Reverse Driving Cable Connections Steering Wheel Control Cable Connections Key A: Connect to steering wheel control cable SWC Key B (standby) Key A Key B GND GND 19
Electrical Connections Wiring Diagram SWC (Steering Wheel Control) AUX 1 IN-R (Red) AUX 1 IN-L (White) FRONT AUDIO OUT-R (Red) FRONT AUDIO OUT-L (White) REAR AUDIO OUT-R (Red) REAR AUDIO OUT-L (White) AUX 2 IN-R (Red) AUX 2 IN-L (White) SUB OUT (Brown) VIDEO 2 IN (Yellow) Radio Antenna in USB SLOT VIDEO 1 IN (Yellow) ISO Connector Fuse 15A CAMERA IN (Yellow) VIDEO OUT 2 (Yellow) VIDEO OUT 1 (Yellow) PARKING (Green) CAMERA (Pink) + External Microphone Pink Tele-mute 20
Installation Guide Important: Remove the two screws on the top of the unit before installation, otherwise, the unit will not work. 1. If relevant, remove any other audio system from the car. 2. After unscrewing the four car radio attachment screws, insert the mounting sleeve into the dashboard. Fix it firmly in place by folding down the metal tabs. 3. If this has not already been done, attach the brackets (2x) to the car radio. In order to do this, use the supplied flat head screws (M5x6mm). 4.
Troubleshooting The following checklist can help you solve the problems which you may encounter when using the unit. Before consulting it, check the connections and follow the instructions in the user manual. Problem General Possible cause Solution Car ignition is not on. Cable is not properly The unit will not switch on. connected. Fuse is burnt. Volume is set at minimum or No sound the mute function is on. The unit or screen does The unit system is unstable. not function normally.
Specifications General AM(MW) Radio Power supply Frequency range 12V DC (11V-16V) Test voltage 14.4V, negative ground Maximum power output 40Wx4 channels Continuous power output 25Wx4 channels (4 10% T.H.D.) Suitable speaker impedance 4-8 ohm Pre-Amp output voltage 2.0V (CD play mode: 1KHz, 0 dB, 10K load) Fuse 15A Dimensions (WxHxD) - Chassis 178x100x164mm - Nose 170x105x21 Weight 3.0kg Aux-in level 300mV Sub out 2.
