Operating instructions

15
After pairing successfully, the Bluetooth icon
lights up. Touch and hold
button to
disconnect.
Dial
KEY PAD
13800138000
1
23
456
789
*
0#
1. Touch to open keypad, input dial
number by the number buttons, touch
KEY PAD
13800138000
1
23
456
789
*
0#
to erase previous number. Touch
KEY PAD
13800138000
1
23
456
789
*
0#
to conrm and dial out.
2. Touch
or press key on the
remote control to cancel.
3. At BT main menu, touch
to dial out
the last dialled number.
Receive
1. After pair is successful, if there is an
incoming call, the unit switches to BT mode
automatically.
2. Touch
or press key on the
remote control to receive.
3. Touch
or press key on the
remote control to hang up.
History
After pair is successful, touch
BT
10
11
to open
LOG menu.
LOG
Phone book
SIM Phonebook
10. Dial
11. Page up
12. Page down
13. Phone book
14. Received calls
15. Dialled numbers
16. Missed calls
17. Show previous menu
BT MENU General Operation
Press the [SRC] button on the panel or touch
top left of the screen to enter Source menu,
touch [
] button to enter the unit system
setup menu, then touch BT to enter BT setting
menu.
1. Pair On/Off
Set the automatically pair on or off. If select
On, the unit will pair automatically.
2. Auto Connect On/Off
Set the automatic connection on or off.
When Auto Connect On and Paired OK, if the
distance is over 10 metres, the connection
will exit. The Bluetooth technology will
automatically establish a connection between
the unit and the registered mobile phone when
the transmission distance is 10 metres or
shorter.
When Auto Connect Off and Paired OK, if the
distance is over 10 metres, the connection
will exit. The Bluetooth technology will not
automatically establish a connection between
the unit and the registered mobile phone when
the transmission distance is 10 metres or
shorter.
Whether the automatic connections is set ON
or OFF, when power is off then on again, the
unit Bluetooth will connect the mobile phone
(if the Bluetooth function was turned on) which
was paired OK last time.
3. Auto Answer On/Off
Set the automatic answering a call ON/OFF.
When Auto Answer On and Paired OK, if there
is an incoming call, in 15 seconds, the unit
will answer automatically, and voice will be
transferred to the unit too.
When Auto Answer Off and Paired OK, if there
is an incoming call, the unit will not answer
automatically until you choose receiving or
rejecting.
Bluetooth Operation
(continued)