Safety Precautions Thank you for purchasing this product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this manual in a safe place for future reference. Please don't change the fuse on the power cord without professional guidance, using improper fuse may cause damage to this unit or even cause fire. Only connect the unit to a 12-volt power supply with negative grounding.
Precautions 1. Never disassemble or adjust the unit without any professional guide. For details, please consult any professional car shop / dealer for inquiry. 2. If the front panel or TFT monitor is squalid, please use a clean silicone cloth and neutral detergent to wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol for cleaning may result in scratching or decoloration to the applicant. 3.
Contents Safety Precautions....................................1 Adjust Bluetooth Settings......................15 Play Music.............................................15 Precautions................................................2 Adjust sound ..........................................16 Adjust Volume.......................................16 Mute.......................................................16 Select Preset Equalizer.........................16 Adjust Fader/Balance............................
Before using Front Panel Note: The graphic in this manual is for reference only, and may be different from that in real unit. Reference to real unit is suggested. 1. [ ] Key: Eject disc 2. Microphone 3. [MENU] Key: Return to the home menu. 4. [ VOLUME / / ] Knob: Press to turn the uint on. Press and hold again to turn the unit off. Press to silence the audio volume. Turn clockwise to increase the volume, and turn counter-clockwise to decrease the volume. 5. Adjust screen brightness 6.
Before using Remote Control Eject disc EJECT Image zoom in/out ZOOM DIM Adjust screen brightness SLOW 5
Before using Notes of Remote Control Using 1) Aim the remote control at the remote sensor on the unit. 2) Remove the battery from the remote control or insert a battery insulator if the battery has not been used for a month or longer. 3) DO NOT store the remote control under direct sunlight or in high temperature environment, or it may not function properly. 4) The battery can work for 6 months under normal condition. If the remote control can't work, please change the battery.
Basic operations Power On/Off Turn on: Short-press [ VOLUME / / ] knob on the front panel or [POWER] key on the remote control. Turn off: When on, long press [ VOLUME / / ] on the panel or press [POWER] key on the remote control. Open SOURCE MENU Press the [MENU] key on the front panel or touch the top left corner of the screen to open the SOURCE MENU. Playing Source Selection Open the SOURCE MENU, and then touch the source you desired or select one source by moving the cursor and then confirm.
Radio mode Select Radio as Playing Source Open the SOURCE MENU and then touch [Radio]. Select One Radio Band Press the [BAND] key on remote control or touch the [ ] icon on the user interface to select one radio band among FM1, FM2, FM3, AM1 and AM2. Tune Auto tuning Press and hold the [ ]/[ ] key on the remote control or touch and hold [ ] / [ ] icon on the user interface more than 1 second to seek a higher / lower station.
Radio mode Local Seeking Touch the [LOC] icon and choose the Radio Local or Distance. When the [LOC] icon turns red, only stations with sufficient signal strength will be detected. EQ Selection Press the [ ] icon and enter the EQ setup. RDS Basics RDS service availability varies with areas. Please understand if RDS service is not available in your area, the following service is not available.
Playback Load Disc You can play video, audio or images stored on the following discs: • DVD Video, DVD-R, DVD-RW • VCD • Audio CD, CD-R, CD-RW Note: Ensure that the disc contains playable content. Eject the Disc Press the [ ] key on the front panel or remote control to eject the disc. When the disc is ejected, the unit switches to the previous source.
Playback Play/Pause 1. O nce a disc,USB or SD/MMC card is inserted, play starts automatically. For DVD movie, if a menu appears, press [ ] to start play. 2. To pause, touch [ ]. To resume play, touch [ ]. 3. Skip to previous/next track/chapter, press [ ]/[ ] key. Previous/Next Touch [ ]/[ ] key on the screen to skip to previous/next track/chapter. Fast Forward/Backward Touch [ ]/[ ] key on the screen repeatedly to playback fast forward/backward. Search for a Folder For video files 1.
Playback For MP3/WMA files: 1. Touch anywhere except the upper left corner to display menu on the screen, if necessary. ]: Play the current chapter repeatedly. 2. [ ]: Play all chapters repeatedly. [ [ ]: Cancel repeat play. A Tip: You can also press REPEAT on the remote control to select repeated play mode. Repeat A-B You can repeat a specific of video file (repeat A-B). 1. Touch bottom half of the screen to display control menu, if necessary. 2. Touch [ 1/2 ] to display the 2nd menu, if necessary. 3.
Playback Picture Files Playback hen you view pictures,touch bottom half of the screen to display W menu on the screen, if necessary. Zooming You can zoom in pictures for a close view. ] repeatedly to zoom in the picture. 1. Touch [ ], [ ], [ ], [ ] keys to pan through the enlarged picture. 2. Use [ Rotate File Touch [ ] repeatedly to rotate the picture. Playback Speed 1. When you view pictures,touch bottom half of the screen to display menu on the screen, if necessary. 2.
Bluetooth mode Bluetooth is a wireless transmission way for short distance. The built-in bluetooth can connect with the mobile phones having bluetooth function. After connecting, you can control your mobile phone through the unit. You can make or receive phone calls with Bluetooth-enabled phones through the unit. You can also listen to music from a Bluetooth-enabled device. Pair the Bluetooth-enabled Devices To connect your Bluetooth device to the unit,you need to pair the device to the unit.
Bluetooth mode Receive a Call By default,all incoming calls are received automaticaly. 1. If there is incoming call, the ncoming call and “Ringing” appear on the screen. Speak into the Bluetooth microphone. 2. When conversation ends, touch [ ](red) to terminate the call. Tip: ∙ You can select to receive calls manually by set [Auto answer] to [Off] status. Switch Phone Call to the Mobile If you do not want your passenger to hear your incoming call, you can switch the call to the mobile. ]. 1.
Adjust sound Adjust Volume To adjust volume, rotate the volume knob on the host car audio. Mute When playback, press the VOLUME knob on the panel or [ the sound is cut off. To resume sound, press the button again. ] on the screen (if available), Select Preset Equalizer You can select preset equalizer: ∙ [User] ∙ [Rock] ∙ [Flat] ∙ [Classic] ∙ [Pop] ∙ [Jazz] ∙ [Techno] ∙ [Optimal] 1. Touch [ ] on the screen. The current Equalizer setting is displayed. 2. Touch [ + ] or [ - ] to select an EQ. 3.
Setup Display System 1. Touch the upper left corner to display main menu. ] in the nether right corner of the screen. 2. Touch [ The second main menu is displayed. 3. Touch [Settings]. The settings menu is displayed. General Settings 1. 2. 3. 4. Touch [General], if necessary. Touch [ ] or [ ] to highlight a setting. Touch on the option to display/select an option. Touch blank area of the screen to exit. • Key color Repeatedly press the control bar on the screen to select the key color.
Setup • Calibration When the touch operation is not sensitive or valid, you should calibrate the touch screen through TS CAL Screen function. Adjust the response positions of the touch panel as followings: 1. Press the [Calibration] icon on the setup menu to enter. 2. Touch [ ] / [ ] to select [Enter]. 3. Use a pointed object to touch the center of [ + ], the [ + ] will move automatically. 4.
Setup • DVD menu Select one language that you are familiar with to display DVD menu. Note: If the DVD disc has the file in the selected language, the dialogues you listened to will be in the selected language. If the DVD disc does not contain the file in the selected language, the dialogues you listened to will be in the default language. Volume Settings You can set different volume for different modes. 1. Touch [Volume]. The volume setting sub-menu is displayed. 2. Touch on a source. 3.
Other modes Listen to Other Devices You can connect an external audio/video device to be unit. 1. Connect the car audio to the device with the supplied AV cable. 2. Touch the upper left corner to display the main menu. 3. Touch [AV-IN1] / [AV-IN2]. 4. Operated the connected the device(see the instructions manual of the device). Tip: If you connected the system to other audio device through the REAR OUT L/R connectot(see “Connect wires” section), touch [AV-IN] to listen to that device.
Other modes 3. Use or delete pictures in flash After the 1st step, you can see the pictures in flash listed out, you can preview them by select one of them, then touch the [ √ ] button to use it as wallpaper. You can also delete pictures in flash which you are not currently using. Select one and touch the garbage box button. SWC Press the desired function key of the list to the control button of the SWC.
Device connections Parking Brake Cable Connections Reverse Driving Cable Connections 22
Device connections Installation Guide Installation and uninstall 1. If relevant, remove any other audio system from the car. 2. Perform the required electrical connections: - If necessary, connect the hand brake wire to your hand brake contact in order to activate the video display when a DVD (when the car is parked).
Specifications Geneal Reference Supply Voltage.................................................................... 12V(DC) Operating Voltage Range........................................................10.5 - 15.8V(DC) Max Operating Current.................................................................................15A Grounding System.................................................... Car Battery Negative Pole Dimensions(WXHXD).................................................. 178X101.50X184.
Specifications Supported formats: ·USB or memory file format:FAT16,FAT32 ·Mp3 bit rate(date rate):32-320 Kbps and variable bit rate ·WMA v9 or earlier ·Directory nesting up to a maximum of 8 levels ·Number of albums/folders:maximum 99 ·Number of tracks/titles:maximum 999 ·ID3 tag v2.0 or later ·File name in Unicode UTF8(maximum length:128 bytes) Unsupported formates: ·Empty albums:an empty album is an album that does not contain MP3/WMA files,and is not be shown in the display.
Troubleshooting Warning Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, please contact your dealer. No power ∙ Car engine has not been started. Start the car engne. ∙ Connections is ncorrect. ∙ Fuse has been damaged. Replace fuse. No sound ∙ Volume is too low. Adjust volume.
Troubleshooting Fuse is broken ∙ The Fuse type is incorrect. Replace it with a 15A fuse. ∙ Speaker wire or power wire is grounded. Check the connections. Display show ERR-12 ∙ USB date error. Check the USB device. About Bluetooth device Music playback is unavailable on the system even after successful Bluetooth connection. ∙ The device cannot be used with the sstem to play music. The audio quality is poor after connection with a Bluetooth-enabled device. ∙ The Bluetooth reception is poor.
Appendix Overall Wiring Diagram MIC 28
CLASS 1 LASER PRODUCT
