RMD 803DAB-BT MANUAL ENGLISH
RMD 803DAB-BT DAB CONNECTION DIAGRAM 13 7 4 1 DAB+ ANTENNA INSTALLATION Place the antenna on the windshield near the 'A post' MIC SUB V-OUT R-IN L-OUT SUB-OUT RIGHT-OUT LEFT-OUT VIDEO-OUT AUX-AUDIO-R-IN AUX-AUDIO-L-IN FRONT-CAM-IN REAR-CAM-IN R-CAM 9 6 3 L-IN 12 8 5 2 R-OUT F-CAM ANT 10 USB 5V 1,5A V-IN 11 9 AUX-VIDEO-IN 10 RADIO-Antenna 11 USB 5VDC 1,5A Remove the cover of the A-post Stick the transparent part of the antenna on the windshield and put the black part on t
Co n t en t s 1. Notes on installation .........................................................................1 2. Wiring diagram..................................................................................1 3. Remote Control Operation..................................................................2 4. Basic Operation ...............................................................................3 5. Introduction to main interface function icons.................................. ............4 6.
MANUAL 3. Remote Control Description 1. Notes On Installation 1 The unit is designed for 12V DC negative ground operation system only. Before installing the unit, make sure your vehicle is connected to DC12V negative ground electrical system. The negative battery terminal must be disconnected before making connections, which can decrease the chance of damaging the unit due to short circuit. Be sure to connect the color coded leades correctly according to the diagram.
4. BASIC OPERATION 5. INTRODUCTION TO MAIN INTERFACE FUNCTION ICONS (1) Turn on/off the Host Unit Enter bluetooth interface connect bluetooth mobile phone to achieve handfree talk function . Enter radio mode, listen to FM/AM whole wave band broadcasting program· a)Turn on If you pug out the car key to turn off the unit last time, insert the key again, and the unit will be turn on automatically.
MANUAL 6. RADIO FUNCTION OPERATION (1) Enter/Exit ( 4) Select station to play a). In the system main interface, touch icon to enter radio interface. b). Touch icon at top right corner of the radio interface to return to the system main interface and touch other function icons to exit from the radio mode. a). Touch frequency icon to select the corresponding radio station to listen to. b). When listening to FM wave band, touch icon to select stereo or single track broadcasting.
. USB FUNCTION OPERATION The item supports USB, the USB must be correctly connected before use, the system will switchover to USB play mode automatically. 8. SD CARD FUNCTION OPERATION When the main unit is equipped with slot for multimedia storage card, this operation is available. ( 1) Insert/Take out SD card ( 1) Insert/Eject USB device a). Insert the U disk with multimedia folders in the USB interface through USB data lines or directly. b).
MANUAL 9. AUX FUNCTION OPERATION 10. MIRROR LINK DESCRIPTION The machine supports external video signal and input of two-way stereo audio signals. When the vehicle has other multimedia equipment, the audio and video output signal can be connected to the audio and video input port. (1) Notes (1) Enter/Exit a). In the system main interface, touch icon to enter AUX(external audio/video)mode. b).
11. BLUETOOTH FUNCTION OPERATION The system provides Bluetooth hands free communication function. if your mobile phone is Bluetooth enabled, it can establish a point-to-point connection with the system, providing telephone dial up and call answering phonebook, Bluetooth music play functions. Tips: As the Bluetooth modules and software of cell phones with different brands are different, some functions may be different or even not compatible with other systems in actual use please forgive us for this.
MANUAL (4)Position the cable (length 3 m) inside the car dashboard until you reach the position of the radio. Connect the cable with golden connector to the DAB antenna input on the rear of the car radio and secure it by screwing the connector. ( 7) Play Bluetooth music a). In the main interface of Bluetooth, touch the icon to enter the interface of playing Bluetooth music. b).
f ) . Radio regional settings Default area is "Europe" if it is used in territory of Europe. ( 2) General settings In the system setting interface, touch the icon to enter the general settings interface. g). Logo setting 1 ). Touch the icon to pop up password in putkeyboard,enter logo setting interface by inputting"0000". 2). Touch the favorite car flag pictures to set the selected car flag as the startup pictures for the system. Tip:When system is restaring,auto logos would be displayed. h).
MANUAL 3). Time system Touch icon hour system. Touch the icon ( 4) Video settings at the right side to set the time system as 12 hour system or 24 a). Aspectraio settings to save and exit the time & date setting interface. k ). About Click to see the software version of the product (If the customer requirements are different, the software used is different, the version is not the same).
5). Sharpness This is used to adjust the sharpness of the pictures while playing the video. Switch to audio settings interface Dolby /igital(AC3) DAT(.dat) MPEG-1/MPEG-2 LPCM/MPEG-Audio 720*480/576(30fps) (MP1/MP2/MP3) Switch to sound field b FLV(.flv) H.264 RMVB RV8/9/10 (.rm/.rmvb/.rmv/ra) VOB(.
WWW.CALIBEREUROPE .