Operation Manual

RMN 801BT NavigatioN MaNual
ENGLISH
7. When finished with the vehicle parameters:
• tap
if you have modified an existing vehicle profile or
• tap
if you have created a new profile.
While this profile is selected, the parameters of your vehicle are taken into account when
planning routes. Note that this leads to a safe route for your lorry only if map data contains the
weight, height, etc. restrictions of the road network in your area.
Tip!
Speed limits for lorries may not be available for all roads. It is advised to enter the
maximum allowed speed in your area for your vehicle instead of the maximum
speed your lorry is capable of.
Tip!
When you often use your vehicle with typical configurations of parameters (for
example with or without a trailer that also affects the length, the height, the number
of axles and the weight), it is better to create different vehicle profiles for the typical
setups and change between the profiles instead of always modifying parameters.
5.2 Setting up waiting time at waypoints
In order to receive a better arrival time estimation and to be able to use time restrictions and
statistical traffic information for future legs of the route, you can enable this feature and
specify a waiting time for each stop on your route.
If you enable the feature as described below, the application will ask you to enter the time you
will spend at a stopover every time you enter a new destination.
1. If you are on the Map screen, tap
to return to the Navigation
menu.
2. In the Navigation menu, tap
, and then .
69