Operation Manual

RMN 801BT NavigatioN MaNual
ENGLISH
6.1.5 Green routing
Route calculation is not only about finding the quickest or shortest route. For some of the
vehicle types, you can also check the fuel consumption and CO
2
emission when planning a
route, and you can create cost effective routes with less effect on the environment.
In Route settings, you can edit the parameters of the selected vehicle. Enter the fuel
consumption values and the price of the fuel. You can also select whether you want to see
the difference between your route and the green route even if the selected routing method is
not Green.
After the above parameters are set, select
as route planning method to
get a fast but also fuel efficient route. Note that travel cost and CO
2
emission calculations are
estimations only. They cannot take elevations, turns, curves and traffic conditions into
account. Also, this routing is not meant to give you the "greenest" route of all. It is still
important to travel quickly so the result is a fast route with low fuel consumption and CO
2
emission.
With a vehicle type where green routing is selectable, whichever route planning method is
selected, the Green details are also shown when you confirm the route:
If the selected route planning method is not Green, and you have allowed the application to
show the green alternative, the price, fuel consumption and CO
2
emission differences
between your selected route and the Green route are also shown on this screen:
Tap the field with these details to switch the route to Green immediately.
6.1.6 Road safety cameras and other proximity alert points
There is a special proximity warning for road safety cameras (like speed or red light cameras)
and other proximity alert points (like schools or railroad crossings). These alert points are not
part of Caliber. You can download them from www.naviextras.com or you can upload points in
a specific text file if needed.
You can also add your own alert points or edit the previously uploaded points. See page 62
for details.
The application can warn you when you approach road safety cameras like speed cameras or
dangerous areas like railroad crossings or school zones. You can set up the different alert
types individually in Sound and Warnings settings (page 82).
The following alert types are available:
• Audio warning: beeps can be played while you are approaching one of these points, or
extra alert sounds if you exceed the given speed limit while approaching.
75