Operation Manual

RMN 801BT NavigatioN MaNual
ENGLISH
• Visual warning: the type of the alert point, its distance and the related speed limit
appear on the Map screen while you are approaching one of these cameras.
For some of the alert points, the enforced or expected speed limit is available. For these
points, the audio alert can be different if you are below or above the given speed limit.
• Only when speeding: The audio alert is only played when you exceed the given speed
limit.
• When approaching: The audio alert is always played when approaching one of these
alert points. In order to draw your attention, the alert can is different when you exceed
the speed limit.
Note!
The warning for road safety cameras is disabled when you are in a country where
road safety camera warning is prohibited. However, you must ensure on your own
liability that using this feature is legal in the country where you intend to use it.
6.1.7 Speed limit warning
Maps may contain information about the speed limits of the road segments. Caliber is able to
warn you if you exceed the current limit. This information may not be available for your region
(ask your local dealer), or may not be fully correct for all roads in the map.
The maximum speed set in the vehicle profile is also used for this warning. Caliber alerts you
if you exceed the preset value even if the legal speed limit is higher.
Speed warning can be fine-tuned in Sound and Warnings settings (page 82).
You can set the relative speed above which the application initiates the warning.
The following alert types are available:
• Audio warning: you receive a verbal warning when you exceed the speed limit with the
given percentage.
• Visual warning: the current speed limit is shown on the map when you exceed it (for
example:
).
You can also choose to see the speed limit sign on the map all the time.
6.1.8 GPS position quality indicator and current time
You can find useful information in the top corners of menu screens.
The current time is displayed in the top left corner.
In the top right corner, the GPS reception quality icon shows the current accuracy of the
position information.
Icon
Description
Caliber has no connection to the GPS receiver: GPS navigation is not
possible.
Devices with a built-in GPS receiver are permanently connected. On
such devices, the icon does not appear in normal circumstances.
76