Operation Manual

RMN 801BT NavigatioN MaNual

ENGLISH

Caliber is connected to the GPS receiver, but the signal is too weak and

the receiver cannot determine the GPS position.

GPS navigation is not possible.

Only a few satellites are received. Position information is available, but

elevation (altitude) cannot be calculated.

GPS navigation is possible, but the position error may be significant.

Altitude information is available, the position is a 3D position.

GPS navigation is possible.

6.1.9 Traffic information in route planning

The recommended route is not always the same between two points. Offline statistical traffic

information (historical speed information or traffic patterns) can be taken into account in the

route calculation based on the time of day and the day of week whenever suitable data exists.

In addition, real-time traffic information can help you avoid current traffic events like temporary

road closures or a traffic jam caused by an accident. Both functions are subject to data

availability.

You can display the historical traffic information on the map if you browse the map and select

this option from the More menu. A 2D map is displayed with road segments coloured by the

density of the traffic in the given period. The current information is shown when you open the

screen. Modify the day of week and the time of day to see the desired period.

You can display the live traffic information on the map if you browse the map and select this

option from the More menu. A 2D map is displayed with road segments coloured by the

severity of traffic events. Tap the event type icon at the road segment and then tap the

button to get information about the traffic event.