Operating instructions

© Calibre UK Limited Issue 2.10 13 August 2012, W: www.calibreuk.com
T:[phone] F: [phone] E: techsupport@calibreuk..com 4
HQVIEW-5XX SYSTEM DESCRIPTION
2.1.
Product Overview
HQView-325 is designed to accept the following input signals:
 VGA analog (computer interface) via 15HDD
 DVI (Digital Visual Interface) via DVI-I (supporting a digital and 2
nd
analogue VGA input)
 HDMI via HDMI connector
2.2.
Product Specification
This section provides technical details for all possible inputs. Please note that not all possible input
options may be applicable to certain output modes.
2.2.1.
Power Supply Requirement
100V-264VAC 50/60Hz connected via a standard IEC connector located on the rear panel.
2.2.2.
Computer (SVGA) Inputs VESA formats
Signal formats: DOS, VGA – WUXGA up to 165MHz pixel clock
RGB video level 0.7V - 1.0V
RGB input impedance 75 Ohms
Sync format Separate H & V sync at TTL/5V levels.
2.2.3.
HDMI & DVI Inputs
HDMI 1.3 with or without HDCP, 36-bit video compatible.
DVI-D input with or without HDCP
Signal formats -video
484i and 576i (SD) in double-rate formats (1440 pixels per line), 480p, 576p (ED), 720p, 1080i at 50,
59.94 & 60Hz, 1080p at 24, 25, 30, 50, 59.94 & 60Hz.
Signal formats – computer
DOS, VGA – WUXGA up to 165 MHz pixel clock
2.2.4.
Audio Output
HQView-5xx features an S/PDIF coaxial digital audio outputting HDMI audio.
2.2.5.
Display Output
A DVI-I connector is provided which will support DVI outputs as well as HDMI 1.3 with 36-bit video and
HD audio formats when connected to a suitable HDMI 1.3 receiver. When the input signal has HDCP
encryption, the DVI-D output connector will carry a similarly HDCP encrypted signal. When an HDCP
encrypted signal is input, but the display device does not support HDCP, the output image will
turn black and a message indicating HDCP Signal will come up to indicate this.