Setup guide

©Calibre UK Limited issue 2.4 November 2012 Page 11
Output Config
Output configuration contains a range of options to tailor the output characteristics which default to
the most commonly found requirements. Please refer to the user manual if you wish to modify these
settings
Menu/Output/Output Config/
Set Input Characteristics
Input Filters
Each input of the Calibre processor has a dedicated memory. This allows the input characteristics to
be set for each channel without affecting the output calibration.
Our menu system is contextual therefore some filters will be greyed out if they are not applicable to
that input
In the main menu select Enhancement
The LTI filter enhances the sharpness of the luminance (B&W) signal.
The CTI filter enhances the colour signal by increasing the steepness of colour edges.
TRNR (Temporal Recursive Noise Reduction) and MNR (Mosquito Noise Reduction) are
available for SD input signals only. These filters reduce spatial and temporal noise as well as
block artifacts.
CCS is a filter to reduce luminance to chrominance cross talk of composite video signals
(only) which appears as a coarse rainbow pattern or random colours in regions of fine
details.