Setup guide

©Calibre UK Limited issue 2.4 November 2012 Page 5
Control Via Web Browser
All LEDView can be controlled with either on screen display (OSD) menu or use the built in web
browser on a Laptop or Wi-fi enabled Smartphone.
LEDView530 only has front panel LCD menu panel
The menu format is the same in all menu methods.
Units will be set to DHCP as default.
You can use the discovery tool to connect to any Calibre processors found on your network. You can
download this software from our website.
http://www.calibreuk.com/software/ledview/DiscoveryTool_V1.0.exe
Or
Use a static address
Factory default address will be IP 169.254.000.001 Mask 255.255.000.000 you can use this or
manually set an address of your choice to match
You can find the network settings in menu/system/network settings