User Guide

4. Route the black and clear zip cord wires into the trunk and connect wires per the separate enclosed block diagram sheet.
CUSTOM Mount
1. Remove the mounting bolts and any existing frame or cover from the rear license plate. Remove license plate.
2. Separate the Laser Defuser module from the license plate frame by removing the two screws on the backside of the
frame.
3. Remove the three unused horizontal mounting tabs from the top of the supplied universal mounting bracket.
4. Apply the supplied double stick tape directly to the Laser Defuser and attach the Laser Defuser to the universal mount-
ing bracket with the included 1/4” screws.
5. Position the Laser Defuser against the license plate and mount it to the factory license plate bracket using the existing
mounting bolts or K40 supplied nylon bolts.
6. Route the black and clear zip cord wires into the trunk and connect wires per the separate enclosed block diagram sheet.
For proper performance, the rear Laser Defuser must be mounted perfectly level and pointed direct-
ly behind the vehicle.
44586 3/05
NOTE: