Thank you for purchasing our Calico Designs FILE CABINET Model #51100 / Black Model #51101 / Pewter Model #51102 / Silver Model #51103 / White Product Support Line: 866.942.0492 Office: 562.942.0492 Rev. 12.10.
ASSEMBLY INSTRUCTIONS - IMPORTANT: Carefully unpack & identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts, or information on other products, please visit our website: www.calico-designs.com or call or write us. Check screws, nuts and bolts periodically (or every 6 months). Tighten if necessary.
Step 1 1 1 4 2 4 3 4 4 2 4 5 • Lay unit upside down on a clean, flat surface. • Insert one corner of Non-locking Casters (1) into slot (see inset) and attach opposite corner to unit using Philips Screw (4). • Repeat for Locking Casters (2). • Screw Caster with Bolt (3) into Metal Plate (5) and tighten with Hex Wrench (6). • Attach Metal Plate (5) to unit as shown using Philips Screws (4). p.
LIMITED WARRANTY Calico Designs (the “Company”) warrants to the original purchaser that this product will be free from defects in its workmanship and materials, under normal residential use and service conditions, as described herein.
