Owners manual

7
5. BASIC OPERATION
5.1 RADIO OPERATION
1. Slide the FUNCTION SELECTOR SWITCH to the RADIO
position.
2. Slide the BAND switch to the desired waveband. Turn the
TUNING KNOB to your desired radio station.
3. Adjust the sound level by rotating the VOLUME CONTROL
KNOB.
4. To turn off the radio, slide the FUNCTION SELECTOR SWITCH
to OFF position.
5. For Stereo FM reception, slide the BAND Switch to the FM
position. The FM STEREO indicator will light when listening to a
strong station that is broadcasting in stereo.
NOTES:
For FM, pull out the telescopic antenna. To improve FM reception
extend and reposition the antenna, reduce its length if the FM-signal
is too strong (very close to a transmitter).
For AM, SW1 & SW2, the set is provided with a built-in aerial, so
there is no need to use the telescopic aerial, the aerial can be
directed by turning the whole set.
5.2 CASSETTE OPERATION
1. Press the STOP/EJECT button to open the cassette door.
2. Insert a cassette tape into the CASSETTE COMPARTMENT and
push the cassette door to close.
3. Slide the FUNCTION SELECTOR SWITCH to TAPE position.
4. Press the PLAY button. Adjust the VOLUME CONTROL KNOB
to your desired listening level.
5. To stop the tape, press the STOP/EJECT button.
FAST FORWARD AND REWIND
The tape can be fast FORWARDED or REWOUND by pressing the
FAST FORWARD button or REWIND button respectively.
PAUSE FUNCTION
During playback or recording, the tape can be stopped temporarily
by pressing the PAUSE button. To continue playback or recording,
press the PAUSE button once again.
AUTO STOP SYSTEM
When the tape runs to its end during playback or recording, the
cassette operation will be stopped automatically.
CAUTION: To avoid damage to the cassette mechanism or to the
cassette tapes, always press the STOP/EJECT button between each
operation.