Infrared Music Maker™ Plus Multimedia Player/Recorder 2395IR Infrared Music Maker™ Plus 2395IRPLC-6 Six-Person Learning Center (shown above) Owner’s Manual califone.
Infrared Music Maker™ Plus Player/Recorder Owner’s Manual Thank you for purchasing this Wireless Music Maker™ Multimedia Player. I invite you to register your product online for its one year warranty coverage at our website: www.califone.com — while you’re there — make sure to learn more about our complete line of portable and installed PA systems, multimedia players and recorders, wired and wireless headphones and headsets, computer peripherals and other Califone products.
Initial Setup AC Line Operation 1. The power cord is located at the rear of the unit. Release the cord retainer tab and uncoil the cord. 2. Plug the cord into a standard 120 volt 50-60 Hz AC outlet. Be sure the plug blades are fully inserted. THE UNIT IS ON WHEN PLUGGED IN. Battery Operation 1. The battery compartment is located at the rear of the unit. Push the lever at the center of the door toward the rear of the unit and then lift the door free. 2. Eight “D” or UM-1 size batteries are required.
Front View 48 33 38 36 3 2 39 40 44 42 18 34 46 48 13 43 41 45 35 37 Rear View HEA DPHONE EXT.SPK . R MIC REMOTE 29 30 L 27 28 0 1 49 B EAT CUT Visit us online at califone.
Top View Detail 1 26 ON ON OFF POWER 10 8 7 ME ME BBS TREBLE TION 5 AM/FM BALANCE PHONES OFF 9 26 32 BALANCE PHONES 9 11 10 MUTE 4 FUNCTION 6 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23.
Getting Started When the ‘Power’ button (1) is depressed the LED (2) to the left of the LCD display (3) will be red for standby mode. Pushing the LED will cause the LED to be green indicating the unit is fully powered up. • Depressing the ‘Tape’ (4) button will cause the LCD display to show ‘Tape’. • Depressing the ‘AM/FM’ (5) button will cause the LCD display to show ‘AM’ or ‘FM’. • Depressing the ‘CD’ (6) button will cause the LCD display to show ‘Disc’.
Radio Function continued Programming Stations Twenty FM stations and Twelve AM stations can be saved in memory with the ‘PRESET’ (16) function. • To save a station into memory, first select a station and then press the ‘PROGRAM’ (17) button to see ‘_ _’ appear on the LCD display. Memory Display CH FM 89.90 MHz _ _ • Press ‘PRESET’ key to choose the desired channel (e.g. channel 1) then press ‘PROGRAM’ again to save. Memory Display FM 89.
CD Function The CD player will accept both 12 cm and 8 cm discs and will read CD, CD-R and CD-RW formats. • Before opening the CD door (18) the LCD will show dashed lines. Open the CD door and the LCD display will show ‘Open’. Insert a CD, close the door and the LCD will display the number of tracks and total play time of the disc. READING TOC AFTER READING TOC 45:06 ———— — — TRACK 11 • Press the ‘PLAY/PAUSE button’ (19) to play the CD and the LCD display will flash while reading the disc.
CD Function continued Memory Programming Up to 16 tracks can be programmed. With the CD stopped press the ‘PROGRAM’ button one time. Select a track to play by pushing the ‘Skip Forward’ | or ‘Skip Back’ | button. Push the ‘PROGRAM’ button again to enter another track to save in memory. When finished, press the ‘PLAY/PAUSE’ button to start the program. Pressing ‘STOP’ at any time exits the Program function. Note: When the CD door is opened all programming is cleared.
CD Function continued To search forward or backward to a particular point on a track during playback Press and hold the (SKIP|) or (SKIP |) buttons to search forward or backward through the current track. Playback resumes at the point you release the button. Program Playback Up to 20 tracks can be programmed for playback. To program a song sequence: 1. Press STOP first if the CD is playing. 2. Press the PROGRAM button. The CD display will show P:01 3.
Cassette Function continued To Fast Wind/Rewind Press the REWIND (42) (43) or FAST-FORWARD (44) (45) key. Press the STOP/EJECT key to stop winding at the desired position. During fast winding, regular play, or recording, the tape will stop automatically when its end is reached. Continuous Play from one cassette deck to the other cassette deck 1. Set the FUNCTION selector to TAPE. 2. Load prerecorded cassettes into Deck A and Deck B. 3. Press the PLAY button on Deck B. 4.
Headphone Listening Listening with Wired Headphones Two headphone jacks are located on the Music Maker™ - a single 3.5 mm jack (26) on the top and one 1/4” phone jack (27) on the rear of the cabinet. A jackbox can be plugged into either for multiple listeners. Califone recommends using headphones for group listening situations.
Other Features and Functions Extension Speaker Jacks Stereo extension speakers may be plugged into the 1/4” L (left) and R (right) speaker jacks (28) on the rear of the cabinet. NOTE: WHEN EXTENSION SPEAKERS ARE PLUGGED IN THE INTERNAL SPEAKERS ARE DISABLED Microphone Jack To record using a dynamic microphone, plug into the 3.5 mm jack (29) on the rear of the cabinet. Another jack, 2.5 mm (30) is provided for use with Califone model 4805AV microphone with remote Start/Stop.
Care and Maintenance continued Cassette Maintenance & Service Cleaning The heads, capstan and pinch roller should be cleaned from time to time to prevent buildup of tape oxide, which degrades performance. 1. Remove cassette tape before cleaning. 2. Clean the head of all visible, reddish-brown oxide with a cotton-tipped swab moistened with a methyl alcohol or any solution specifically manufactured for this purpose. Caution: DO NOT scrape the head surface with hard, sharp or abrasive objects.
Troubleshooting PROBLEMS General The unit does not operate. Cassette Cassette cannot be loaded. ITEMS TO CHECK Is the AC power cord unplugged? Are the batteries fully charged? Is cassette being loaded properly? Is the PLAY key depressed? The tape does not move. Is the PAUSE key depressed? The tape gets caught in the tape transport mechanism. Is the pinch roller or capstan dirty? Is there excessive slack in the tape? Tape speed is slow.
CAUTION RISK OF ELECTRIC SHOCK - DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. The lightening flash with arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons. This product is not designed to function normally in strong electromagnetic fields.
