User's Manual
Page 1
MeshConnect™ Module Series
DESCRIPTION
CEL's MeshConnect™ Module Series provides high performance
and low cost 2.4 GHz IEEE 802.15.4 / ZigBee modules for a broad
range of wireless networks. The MeshConnect certied and quali-
ed modules, enable customer to accelerate time to market by
greatly reducing design and certication phases of development.
CEL's MeshConnect™ radio modules leverage the advanced
features of the MeshConnect™ Integrated Circuit (IC). The IC is
a true single-chip solution, compliant with ZigBee specications
and IEEE 802.15.4, a complete wireless solution for all ZigBee
applications. The IC consists of an RF transceiver with baseband
modem, a hardwired MAC and an embedded 8051 microcon-
troller with internal Flash memory. The device provides numerous
general-purpose I/O pins, peripheral functions such as timers and
UARTs and is one of the rst devices to provide an embedded
Voice CODEC. This device is also ideal for low power applications.
The original MeshConnect module delivers excellent performance
at a surprisingly low cost. The module’s +6dBm output power
means better range, more reliable transmission and fewer nodes
in your network. It also makes these modules ideal for applica-
tions where cost and power constraints do not allow for external
power ampliers or peripheral range extension components.
The MeshConnect Extended Range module adds a power ampli-
er (PA) and low noise amplier (LNA) to increase range to over
two miles - plus more reliable transmission and fewer nodes in
your network. It is especially useful for open outdoor applica-
tions where the nodes are physically far apart, or for indoor use
where the nodes have to operate in a noisy RF environment. The
Extended Range Module’s outstanding +123 dBm budget link
ensures high quality connections even in such harsh environments.
Integrated Transceiver Modules for ZigBee / IEEE 802.15.4
Development Kits available: ZICM2410P0-KIT2-1, ZICM2410P2-KIT1-1
The information in this document is subject to change without notice, please conrm data is current
Document No: 0007-00-07-00-000 (Issue C)
Date Published: October 6, 2009
PRELIMINARY DATA SHEET
ORDERING INFORMATION
Part Number Order Number Description
MeshConnect™
Module
ZICM2410P0-1
+6 dBm Output power,
PCB Trace Antenna
ZICM2410P0-1C
+6 dBm Output power,
with U.FL Connector for
external antenna
ZICM2410P0-KIT2-1
+6 dBm Engineering
Development Kit
MeshConnect™
Extended Range
Module
ZICM2410P2-1
+20 dBm Output power,
PCB Trace Antenna
ZICM2410P2-1C
+20 dBm Output power,
with U.FL Connector for
external antenna
ZICM2410P2-KIT1-1
Evaluation board for +20
dBm module
APPLICATIONS
Home &
Building Automation
• Security
• HVAC control
• Lighting control
• Thermostats
Industrial Controls
• Food processing controls
• Trafc Management
• Sensor Networks
• Asset Management
• Barcode reader
• Patient Monitoring
• Glucose monitor
• High RF performance:
- Up to 123.5 dB RF Link Budget
- RX Sensitivity: -97 dBm and -103.5 dBm
- RF TX Power:+6 dBm and +20 dBm
• Scalable Data Rate: 250 kbps, 500 kbps and 1Mbps
• Miniature footprint: 1” x 1.350” (25.4 mm x 34.3 mm)
• Voice Codec Support: µ-law/a-law/ADPCM
• 4 Level Power Management Scheme w/ Deep Sleep Mode (0.3 µA)
• Integrated PCB trace antenna
• 16 RF channels
• Up to 12,000 feet of range
• AES 128-bit encryption
• FCC, CE and IC certications
• ROHS compliant
FEATURES
• 96 kB FLASH Memory
• 8 kB SRAM
• 8051 MCU core
• up to 22 GPIO Pins
• SPI (Master/Slave) + UARTs
• I
2
S/PCM Interface with two
128-byte FIFOs
• µ-law/a-law/ADPCM Voice Codec
• 4-channel 8-bit ADC
MeshConnect
™
Module Series
Module and Extended Range Module