User Manual

Mini Module External
A
ntenna Implementation
This document is subject to change without notice.
Document No: 0011-00-16-11-000 (Issue C)
Page 8
Disclaimer
For More Information
For more information about CEL MeshConnect products and solutions, visit our website at: www.cel.com/MeshConnect.
Technical Assistance
For Technical Assistance, visit www.cel.com/MeshConnectHelp.
The information in this document is current as of the published date. The information is subject to change without notice. For actual
design-in, refer to the latest publications of CEL Data Sheets or Data Books, etc., for the most up-to-date specifications of CEL
products. Not all products and/or types are available in every country. Please check with an CEL sales representative for availability and
additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior written consent of CEL.
CEL assumes no responsibility for any errors that may appear in this document.
CEL does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising
from the use of CEL products listed in this document or any other liability arising from the use of such products. No license, express,
implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of CEL or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor
product operation and application examples. The incorporation of these circuits, software and information in the design of a customer’s
equipment shall be done under the full responsibility of the customer. CEL assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
While CEL endeavors to enhance the quality, reliability and safety of CEL products, customers agree and acknowledge that the
possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons
arising from defects in CEL products, customers must incorporate sufficient safety measures in their design, such as redundancy,
fire-containment and anti-failure features.