Specification Sheet
3
8
"
1
3
16
"
1
15
16
"
2
5
16
"
GRID HEIGHT
WITH COLLAR UP:
1-3/8" TO 2-3/8"
6"
2
7
8
"
3
1
4
"
8
7
16
"
5
1
4
" SQ
THD: 3-1/2" IPS(NPSM)
THD: M10 X 1.5
(BOLT THREAD)
2" FIP OUTLET (2"-11.5 NPT)
GRID HEIGHT
WITH COLLAR DOWN:
3/4" TO 1-3/4"
5
1
8
" SQ
Figure 1.
COLLAR IN
UP
POSITION
Figure 2.
COLLAR IN
DOWN
POSITION
CAST IRON 2" IPS
Figure 3.
MISSION PATTERN
OPEN AREA = 8.95 in²
www.californiafaucets.com
Page
1
9172-IP-2_sp_130801
®
StyleDrain
MISSION
9172-IP-2
ALL DIMENSIONS SHOWN TO NEAREST 1/16"
Codes/Standards Applicable
Meets or exceeds the following at date of manufacture:
ASME A112.18.1/CSA B125.1
•
Suggested Uses
Shower drain
•
Patio/Atrium drains
•
Other wetted area floor drains
•
Features
Over 30 finishes including 14 PVD finishes
•
Solid brass decorative grid with no visible surface screws
•
Surface is foot friendly with no sharp edges
•
Rigid grid construction - will not dish or bend
•
Square design for easy floor design and installation
•
Outlet flow rate: 19 gpm (73 Lpm) with 1/4" head of water
•
Latex coated cast iron body with reversible weep-hole membrane collar
•
Outlet connection: 2” NPT female
•
For complete selection, see www.californiafaucets.com
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ASME A112.18.2/CSA B125.2
•
US PAT NO. 8043497
•
®
Features
Create "invisible drain" by allowing inlay of tile/stone to drain cover
•
to match surrounding tile/stone
Available in 5 finishes, including 4 PVD finishes
•
All brass decorative frame with no visible screws
•
Frame surface is foot friendly with no sharp edges
•
Rigid frame construction - will not dish or bend
•
Square frame design for easy floor design and installation
•
Outlet flow rate 15 gpm (57 Lpm) with 1/4" head of water
•
PVC body with reversible membrane collar
•
2" slip & 3" spigot outlet
•