Instruction Manual

StyleDrain

™

Plastic Drain Upgrade Kit

Model # 9178-UG-2

Deluxe Drain Throat and Frame for 2" IPS Shower Drain Collar

(Patent Pending)

California Faucets

StyleDrain

Plastic Drain Upgrade Kit fits directly into most common 2” (pipe size) ABS or PVC three (3)

piece shower drain bodies. The 9178-UG-2 Square Drain Throat, Stainless Steel Grout Frame, and Mudguard replaces the

“Adjustable Strainer Assembly”, “Throat”, “Riser” or “Inlet” portion of these drains.

This upgrade is performed after shower rough flooring is complete, but before tile installation begins. The as

supplied drain’s “strainer assembly” is removed and replaced by the 9178-UG-2.

9178-UG-2

Plastic Drain Throat Upgrade Kit

For 2” IPS Drain Collar

Plastic Oddities

OateKohle

The 9178-UG-2 Plastic Drain Throat Upgrade Kit fits many commonly found shower drain fittings with 2” IPS Collar, including

those pictured above plus many, many more.

9178-UG-2_INSTL_090619.doc Pg. 1

PAGE 1
StyleDrain™ Plastic Drain Upgrade Kit Model # 9178-UG-2 Deluxe Drain Throat and Frame for 2" IPS Shower Drain Collar (Patent Pending) California Faucets® StyleDrainTM Plastic Drain Upgrade Kit fits directly into most common 2” (pipe size) ABS or PVC three (3) piece shower drain bodies. The 9178-UG-2 Square Drain Throat, Stainless Steel Grout Frame, and Mudguard replaces the “Adjustable Strainer Assembly”, “Throat”, “Riser” or “Inlet” portion of these drains.
PAGE 2
INSTALLATION INSTRUCTIONS • California Faucets recommends this product be installed by licensed contractor(s) THROAT/GRID HEIGHT ADJUSTMENT (see figure 1) 1. To obtain proper grid height, rotate THROAT [8] to raise or lower. One (1) complete rotation of THROAT [8] is equal to 1/8” in vertical adjustment. 2. Proper height should be determined by flooring contractor. 3. Before the final mortar application it is suggested to place some pea GRAVEL [9] over WEEP [7] holes to prevent blockage of the holes.