User guide

GRID INSTALLATION (see figure 5, 6 & 7)
1. After completion of finished flooring, remove plastic
MUDGUARD [10] by drilling a hole in the center and
pull out.
2. Place decorative GRID [11] onto drain THROAT [8].
3. Find location of the four SETSCREWS [12] and
tighten all screws securely with supplied ALLEN
KEY [13].
SERVICE ACCESS
(see figure 6 & 7)
1. Find location of the four SETSCREWS [12] and
loosen screws with supplied ALLEN KEY [13] by
turning counter clockwise and remove GRID [11].
2. These installation instructions and ALLEN KEY [13]
should be stored in a secure place for future
reference.
Pg. 4 9170_INSTL_090619.doc