Installation Sheet

CF-KXX-110_ii_150901 Pg 2
2
WATER CONNECTIONS
Important: The water supplies MUST be flush of all debris prior to
running water through the faucets SPRAYHEAD (8); the following
procedure will ensure debris removal.
 Tighten red colored nut on HOT INLET HOSE
(4a) to HOT SUPPLY (9a)
 Tighten blue colored nut on COLD INLET HOSE
(4b) to COLD SUPPLY (9b)
 Ensure that faucet HANDLE (10) is in closed
position as shown (straight up)
 Turn on HOT and COLD SUPPLIES (9a) & (9b)
 Place BUCKET (11) (not supplied) under SHANK
(1a)
 Slowly open HANDLE (10) on faucet and cycle
through cold and hot water until water runs clear
HOT
supply
COLD
supply